SMC Pneumatic Soft Start Function Fitting 1 MPa

  • RS-stocknr. 907-6609
  • Fabrikantnummer AV4000-04-5DZ-Q
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Soft Start & Dump Valve

Pneumatic start-up valves gradually increase pressure on system start-up and exhaust air rapidly when the system is shut down. Air supply and exhaust can be manually operated, and can be locked in the exhaust position.

Combined soft start and dump spring return valve
Temperature range 0°C to +60°C
Compatible with SMC modular series FRL
Maximum working pressure: 10 bar
Proof pressure rating:15 bar
Gauge port sizes from G 1/4 to G 1/2
Piston and slide material NBR
Low power consumption solenoid - 24Vdc @ 1.8W
Large CV factor

Note

When using the dump valve facility, it is recommended that a silencer is fitted to the relieving port.

Specificaties
Kenmerk Waarde
Manufacturer Series AV4000
Minimum Operating Pressure 0.2MPa
Maximum Operating Pressure 1 MPa
Body Material ADC
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
153,96
(excl. BTW)
186,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 153,96
Related Products
In-line excess flow shut-off valves. Compliant with applicable ...
Description:
In-line excess flow shut-off valves. Compliant with applicable safety regulationsTamper-proofLow pressure dropAutomatically re-initialised after fault correctExcellent resistance to corrosionHigh rated air pressure value.
Adaptors for connecting pneumatic hose at right-angles. Bolts ...
Description:
Adaptors for connecting pneumatic hose at right-angles. Bolts made from zinc-passivated steel and plastic bodiesNitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to 80°C.
Shuttle (OR gate) version can be used to ...
Description:
Shuttle (OR gate) version can be used to connect independent signal sources to a common pilot lineAND gate function gives output signal only when both input signals are presentColour coded port identification.
Anodised aluminium manifolds,Operating pressure: 20 bar (max),Operating Temperature: ...
Description:
Anodised aluminium manifolds,Operating pressure: 20 bar (max),Operating Temperature: -10°C to +80°C.