Hi-Force Single, Portable General Purpose Hydraulic Cylinder, HSS54, 4.5T, 100mm stroke

  • RS-stocknr. 807-930
  • Fabrikantnummer HSS54
  • Fabrikant Hi-Force
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Standard Cylinders

For lifting and pushing applications where flexibility and high cycle requirements exist
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse range of industries including, mining, power stations, railways shipyards and steelworks.
Service and repair seal kits are available (808-185, 808-179)

//media.rs-online.com/t_line/L807918-01.gif

Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard.
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps

Warning

  • Saftey Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specificaties
Kenmerk Waarde
Manufacturer Series HSS
Single/Double Acting Single
Capacity 4.5t
Stroke 100mm
Closed Height 182mm
Extended Height 282mm
Cylinder Effective Area 14.4cm²
Oil Capacity 64cm³
Outside Diameter 38mm
Maximum Operating Pressure 700 bar
Weight 1.5kg
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
377,07
(excl. BTW)
456,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 377,07
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
Single acting, spring returnFor use when a large ...
Description:
Single acting, spring returnFor use when a large stroke is required for a spreading applicationFitted with a female high flow couplerRequires a high pressure pump and hose link, available separately.
The Festo AEVC series single-acting short-stroke cylinder has ...
Description:
The Festo AEVC series single-acting short-stroke cylinder has a male thread piston-rod end design structure with flexible cushioning rings/plates at both ends. The actuator stroke is a 5 mm with retracted spring return force of 4 N. Piston diameter - ...
The through-bore piston design offers the user flexibility ...
Description:
The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing modeThe replacement saddle is threaded to screw into the threaded counter-bore of the ...