Xylem Jabsco Centrifugal Electric Operated Positive Displacement Pump, 18L/min, 1.7 bar, 230 V

  • RS-stocknr. 705-9374
  • Fabrikantnummer 53020-2013
  • Fabrikant Xylem Jabsco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Jabsco Utility Pumps

Self-priming portable pumps for a huge range of applications - transfer, tank emptying, drainage, sump pumping, waste water plus many more! ,Nitrile oil resistant impellers fitted as standard with Neoprene high pressure impellers also available

Rapid self-priming up to 3 m vertical lift
Will handle hard and soft solids
Can pump up to 90% entrained air
10 minute dry run protection
Light, compact, portable and tough
Fitted with thermal overload cut-out
33 LPM and 80 LPM models fitted with continously rated motors
316 stainless steel shafts with Carbon / Ceramic mechanical seals
Will pump liquids with viscosity <150 cP
Quick and easy to maintain
Service Kits include: Impeller, Mechanical shaft seal, O-Ring and 4 bolts for impeller end cover

Caution

Do not pump gasoline, diesel, solvents, thinners or other flammable liquids. Not suitable for use in explosive atmospheres

Xylem Jabsco Utility Pump

The Xylem Jabsco utility pump is a self-priming, electrically operated pump has a maximum flow rate of 18L/minute and working Pressure is 1.7 bar. It is used for a huge range of applications such as transfer, tank emptying, drainage, sump pumping, wastewater, and more. It has nitrile oil resistant impellers fitted as standard. However, a variant with neoprene high-pressure impellers is also available.

Service kits include:
Impeller, mechanical shaft seal, O-ring, and 4 bolts for impeller end cover.

Caution:
Do not pump gasoline, diesel, solvents, thinners, or other flammable liquids
Not suitable for use in an explosive atmosphere

Features and Benefits


Supply voltage is between 230VAC
• Input power is 180W
• Rapid self-priming up to 3m vertical lift
• Will handle hard and soft solids
• Can pump up to 90% entrained air
• 10 minute dry running protection
• Light, compact, portable, and tough
• Fitted with thermal overload cut-out
• 33LPM and 80LPM models fitted with continuously rated motors
• 316 stainless steel shafts with carbon / ceramic mechanical seals
• Will pump liquids with viscosity less than 150cP
• Quick and easy to maintain

Certifications


IP54 rated

Specificaties
Kenmerk Waarde
Pump Type Centrifugal
Drive Type Electric
Maximum Flow Rate 18L/min
Maximum Head 15m
Maximum Working Pressure 1.7 bar
Input Connection 3/4 in BSP
Output Connection 3/4 in BSP
IP Rating IP54
Body Material Bronze
Supply Voltage 230 V
Input Power 180W
Input Connection Size 3/4in
Output Thread Standard or Connection Type BSP
Output Connection Size 3/4in
Input Thread Standard or Connection Type BSP
6 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
552,55
(excl. BTW)
668,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 552,55
Related Products
Blackstone pumps are designed for industrial use. Easy ...
Description:
Blackstone pumps are designed for industrial use. Easy to install, with wide, flat bases and mounting holes to allow for tank, shelf or floor mounting (horizontal mounting). Mounting holes are also available on the rear of the pump. The external ...
Suitable for dispensing, metering and general transfer applications ...
Description:
Suitable for dispensing, metering and general transfer applications the DF2a peristaltic pump from Prominent provide a cost effective, accurate option for various applications. The DF2a is virtually silent in operation and simple to operate and install. Non siphoning pumping method ...
The M1500 peristaltic pump is a versatile and ...
Description:
The M1500 peristaltic pump is a versatile and highly capable solution for your fluid transfer and dosing needs. Their simplistic design ensures reliability and minimal maintenance costs with damaged tube or tube elements easy to change within seconds, minimising downtime ...
The Xylem Flojet AD4/90 multi-chamber diaphragm positive displacement ...
Description:
The Xylem Flojet AD4/90 multi-chamber diaphragm positive displacement pump is designed for transfer, demand/delivery, filtration, high flow booster, carbonation, beverage dispense and continuous reverse osmosis applications. Its maximum flow rate is 3L/min. New multi-chamber technology with patented valve design ...