Infineon ICE3PCS02GXUMA1, PFC Controller 100 kHz 8-Pin, DSO-8 25 V
- RS-stocknr.:
- 244-0875
- Fabrikantnummer:
- ICE3PCS02GXUMA1
- Fabrikant:
- Infineon
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 2 eenheden)*
€ 3,54
(excl. BTW)
€ 4,28
(incl. BTW)
Voeg 46 eenheden toe voor gratis bezorging
Op voorraad
- Plus verzending 1.704 stuk(s) vanaf 20 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 2 - 18 | € 1,77 | € 3,54 |
| 20 - 48 | € 1,68 | € 3,36 |
| 50 - 98 | € 1,515 | € 3,03 |
| 100 - 198 | € 1,36 | € 2,72 |
| 200 + | € 1,30 | € 2,60 |
*prijsindicatie
- RS-stocknr.:
- 244-0875
- Fabrikantnummer:
- ICE3PCS02GXUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | PFC Controller | |
| Start-up Supply Current | 680μA | |
| Maximum Source Current | -6μA | |
| Switching Frequency | 100kHz | |
| Supply Current | -435mA | |
| Mount Type | Surface | |
| Package Type | DSO-8 | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 25V | |
| Minimum Operating Temperature | -40°C | |
| Series | ICE3PCS02G | |
| Length | 5mm | |
| Height | 1.75mm | |
| Width | 4 mm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type PFC Controller | ||
Start-up Supply Current 680μA | ||
Maximum Source Current -6μA | ||
Switching Frequency 100kHz | ||
Supply Current -435mA | ||
Mount Type Surface | ||
Package Type DSO-8 | ||
Pin Count 8 | ||
Maximum Supply Voltage 25V | ||
Minimum Operating Temperature -40°C | ||
Series ICE3PCS02G | ||
Length 5mm | ||
Height 1.75mm | ||
Width 4 mm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The Infineon Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM) is a 8-pins wide input range controller IC for active power factor correction converters. It is designed for converters in boost topology, and requires few external components. Its power supply is recommended to be provided by an external auxiliary supply which will switch on and off the IC.
External synchronization
Low peak current limitation
High efficiency over the whole load range
Lowest count of external components
Accurate and adjustable switching frequency