Infineon ICE2PCS03GXUMA1, Controller IC 315 kHz 8-Pin, DSO-8 25 V
- RS-stocknr.:
- 273-7416
- Fabrikantnummer:
- ICE2PCS03GXUMA1
- Fabrikant:
- Infineon
Subtotaal (1 rol van 2500 eenheden)*
€ 1.400,00
(excl. BTW)
€ 1.700,00
(incl. BTW)
Voeg 2500 eenheden toe voor gratis bezorging
Tijdelijk niet op voorraad
- Verzending vanaf 29 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,56 | € 1.400,00 |
*prijsindicatie
- RS-stocknr.:
- 273-7416
- Fabrikantnummer:
- ICE2PCS03GXUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | Controller IC | |
| Maximum Source Current | 38μA | |
| Sub Type | Power Factor Controller | |
| Maximum Sink Current | 41μA | |
| Switching Frequency | 315kHz | |
| Mount Type | Surface | |
| Package Type | DSO-8 | |
| Minimum Supply Voltage | 11V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 25V | |
| Minimum Operating Temperature | -40°C | |
| Series | ICE2PCS0 | |
| Standards/Approvals | RoHS | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type Controller IC | ||
Maximum Source Current 38μA | ||
Sub Type Power Factor Controller | ||
Maximum Sink Current 41μA | ||
Switching Frequency 315kHz | ||
Mount Type Surface | ||
Package Type DSO-8 | ||
Minimum Supply Voltage 11V | ||
Pin Count 8 | ||
Maximum Supply Voltage 25V | ||
Minimum Operating Temperature -40°C | ||
Series ICE2PCS0 | ||
Standards/Approvals RoHS | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The Infineon PFC Controller is a standalone power factor correction controller in continuous conduction mode. It is a 8 pin wide input range controller IC for active power factor correction converters. It is designed converters in boost topology, and requires few external components. Its power supply is recommended to be provided by an external auxiliary supply which will switch on and off the IC. The IC operates in the CCM with average current control and in DCM only under light load condition.
Short start up duration
Average current control
Soft overcurrent protection
Enhanced dynamic response
Output over voltage protection
Cycle by cycle peak current limiting