Schaffner FN2060 Series 10A 250 V ac 400Hz Chassis Mount RFI Filter, with Tab Terminals, Single Phase

  • RS-stocknr. 170-5007
  • Fabrikantnummer FN2060-10-06
  • Fabrikant Schaffner
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FN 2060 Series

Schaffner's FN2060 two-stage filters are designed for easy and fast chassis mounting. All filters provide a high conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behaviour.

Can be used in a wide range of applications such as electrical and electronic equipment, building automation, industrial applications, machinery, medical equipment and various noisy applications requiring good filter performance.

Two-stage chassis mount filters in aluminium case
Extra stage improves common mode performance
Connection by 0.25in Faston terminals
Rated currents from 1 → 30 A
High differential and common-mode attenuation
Optional medical versions (B type)
Optional safety versions (A type)

Note

FN2060 filters are also available as single-stage filters (FN2010 series)

Approvals

UL recognised, CSA, VDE.

Approvals

UL; CSA; VDE

Specificaties
Kenmerk Waarde
Maximum Current Rating 10A
Maximum Voltage Rating 250 V ac
Mounting Type Chassis Mount
Termination Style Tab
Number of Phases 1
Series FN2060
Number of Stages Two Stage
Operating Frequency 400Hz
Length 54mm
Depth 85mm
Height 30.3mm
Capacitance 4.7 nF, 470 nF
Inductance 800 μH
Dimensions 54 x 85 x 30.3mm
Leakage Current 0.734 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +100°C
Resistance 470kΩ
200 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Box of 50)
14,661
(excl. BTW)
17,74
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
50 +
€ 14,661
€ 733,05
*prijsindicatie
Related Products
2 Line filter with IEC connetor fuseholder and ...
Description:
2 Line filter with IEC connetor fuseholder and switch in metal caseMedical version with low leakage currentFor use with Switched mode power supplies, DC applications and Measurment instrumentsLoad side connections 6.3mm tab.
2 Line filter with IEC connetor in metal ...
Description:
2 Line filter with IEC connetor in metal caseNo bleed resistor fittedFor use with Switched mode power supplies, DC applications and Measurment instrumentsLoad side connections 6.3mm tab.
EPCOS B84142-Bx-R Series Power line filters for convertors ...
Description:
EPCOS B84142-Bx-R Series Power line filters for convertors and power electronics. These 2 line filters feature a high insertion loss due to its two stage construction, easy to install and has optimised leakage current. Rated voltage VR: 250 V AC/DC.Rated ...
These chassis-mounted standard filters must be fitted as ...
Description:
These chassis-mounted standard filters must be fitted as close as possible to the mains supply point of entry.These filters can protect equipment against any undesirable interference from the mains supply. They also overcome undesirable interference voltages caused by the equipment ...