EPCOS, B84771 3A 250 V ac/dc 50 → 60Hz, Panel Mount RFI Filter, Tab, Single Phase

  • RS-stocknr. 780-4979
  • Fabrikantnummer B84771C0003A000
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

IEC Inlet Filter without Bleed Resistor

2 Line filter with IEC connetor in metal case
No bleed resistor fitted
For use with Switched mode power supplies, DC applications and Measurment instruments
Load side connections 6.3mm tab

Approvals

UL recognised component, VDE, CSA certified, SEMKO

Epcos B84771 Series

Specificaties
Kenmerk Waarde
Maximum Current Rating 3A
Maximum Voltage Rating 250 V ac/dc
Mounting Type Panel Mount
Termination Style Tab
Number of Phases 1
Series B84771
Operating Frequency 50 → 60Hz
Length 50mm
Depth 43.5mm
Height 22.5mm
Capacitance 0.1 x 1 μF, 2200 x 2 pF
Dimensions 50 x 43.5 x 22.5mm
Inductance 2.5 x 2 mH
Leakage Current 0.173 mA
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Standards Met UL 1283
29 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
5,58
(excl. BTW)
6,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,58
10 - 49
€ 4,64
50 - 99
€ 4,42
100 - 199
€ 4,20
200 +
€ 3,98
Related Products
Chassis mounting RFI filters providing good attenuation in ...
Description:
Chassis mounting RFI filters providing good attenuation in both differential and common mode over the frequency range 600 KHz to 100MHzDurable hermetically sealed construction. Ideal for industrial microprocessor-controlled machine systems and other sensitive electronic equipmentConnection is via 250 (1/4 in) ...
Schaffner's FN410 PCB filter is a single-phase, two-stage ...
Description:
Schaffner's FN410 PCB filter is a single-phase, two-stage filter designed for easy and fast PCB-mounting. A selection on amperage ratings are designed to offer you the desired standard product. High attenuation two-stage designPCB-mountable designMetal housing.
Schaffner FN 2090 series 1-phase filters are designed ...
Description:
Schaffner FN 2090 series 1-phase filters are designed for fast and easy chassis mounting. Featuring exceptional conductive attenuation, FN 2090 series filters are designed for noisy applications requiring excellent filter performance. Typical applications could be electrical and electronic equipment, consumer ...
High Performance K Series RFI Line Filters for ...
Description:
High Performance K Series RFI Line Filters for SMPS Emission Control. Current Rating from 30 to 600ADelta or WYE configuration for 3-Phase productsSafety agency approvals - see chart for detailsVoltage ratings up to 250V for single phase productsVoltage ratings up ...