Rohde & Schwarz Power Quality Analyser

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Rohde & Schwarz Power Quality Analyser

The Rohde & Schwarz Power analyser is a compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition, it features a numerical and graphical display with 26 key parameters.

Features and Benefits

• Power measurement ranges between 50μW and 12kW
• Analogue bandwidth ranges between DC and 100kHz
• The sampling rate is 500k sample/s
• Basic accuracy is 0.05%
• Clear display of all the measured parameters
• Measurement accuracy
• 26 different measurement and mathematical function

Certifications


CAN/CSA-C22.2 NO. 61010-1
certified
• UL 61010-1 approved
• DIN EN 61010-1
• DIN EN 61326-1
• DIN EN 55011
• IEC 62301
• EN 50564
• EN 61000-3-2

Specificaties
Kenmerk Waarde
Absolute Maximum Current Measurement 20A
Absolute Maximum Power Measurement 12kW
Number of Phases 1
Maximum Voltage 600V
Best Voltage Measurement Accuracy 0.05 %
Best Current Measurement Accuracy 0.05 %
Display Type TFT
Measurement Standards CAN/CSA-C22.2 No, DIN EN 55011, DIN EN 61010-1, DIN EN 61326-1, UL 61010-1, 610101
Interface Type Ethernet, USB
Power Source Mains
Maximum Frequency 100kHz
Minimum Operating Temperature +5°C
Minimum Frequency 0 kHz
Dimensions 280 x 222 x 88mm
Height 88mm
Length 280mm
Weight 3.3kg
Maximum Operating Temperature +40°C
Width 222mm
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
1.790,00
(excl. BTW)
2.165,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.790,00
Related Products
Three-phase energy and power failure analyserPower and energy ...
Description:
Three-phase energy and power failure analyserPower and energy analysis in supply networksHarmonics analysis in accordance with EN 61000-4-7Network quality in accordance with EN50160 with statistical bar chartFlicker analysis as per standard EN 61000-4-15Recording of power-on operations and errorsAnalysis module ...
The 6811C AC power source/analyser from Keysight is ...
Description:
The 6811C AC power source/analyser from Keysight is a performance AC test solution with 375 VA maximum output power & a built-in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity (LAN, ...
The 6813C AC power source/analyser from Keysight is ...
Description:
The 6813C AC power source/analyser from Keysight is a performance AC test soloution with 1750 VA maximum output power and a built in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity ...
The HM6050-2 line impedance stabilization network (LISN) is ...
Description:
The HM6050-2 line impedance stabilization network (LISN) is basically a filter network. Measurement of Line-conducted Interference within the Range from 9kHz…30MHz (CISPR 16)Selectable Transient LimiterArtificial Hand Connector A lowpass filter connects the DUT to the AC power lines.The LISN presents ...