Redundancy module for use with Power Supplies Screw

  • RS-stocknr. 136-9954
  • Fabrikantnummer PIRD20.241
  • Fabrikant PULS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

PIANO Series Diode Redundancy Module

The PIRD20.241 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and two outputs, which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behaviour and any kind of “hiccup” overload behaviour.
The PIRD20.241 is the perfect solution to use in a redundant system, if the power supply itself is equipped with a DC-OK signal.

Features and Benefits

• Cost effective • Dual input and output
• Two diodes (common cathode)
• DC 12-28 V ±25% wide range input
• Full power between -40°C and +55°C
• Large screw terminals

Product Application Information

Ideal for use in redundant systems and for separating sensitive loads from non-sensitive loads.

Approvals

UL 508 Listed USA and Canada, UL 60950-1 USA and Canada, EU Declaration of Conformity, EAC

Specificaties
Kenmerk Waarde
Accessory Type Dual Input Redundancy Module
For Use With Power Supplies
Input Current Range 0 → 10 (<+55 °C) A, 0 → 6.25 (<+70 °C) A
Supply Voltage 12 → 24V dc
Standards Met EN 55011, EN 55022, EN 61000-6-1, EN 61000-6-2, IEC/CISPR 16-1-2, IEC/CISPR 16-2-1, UL 508, UL 60950-1
Rated Input Voltage 9 → 35 (Input 2) V dc, 12 → 28 (Input 1) V dc
Mounting Style DIN Rail Mount
66 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
35,51
(excl. BTW)
42,97
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,51
Related Products
The Phoenix Contact QUINT ORING is a DIN ...
Description:
The Phoenix Contact QUINT ORING is a DIN rail mountable active redundancy module with ACB technology and monitoring functions. Using a redundancy module it is possible for two power supply units of the same type connected in parallel on the ...
The din rail mounting, Trio Diode redundancy modules ...
Description:
The din rail mounting, Trio Diode redundancy modules from Phoenix contact are designed to isolate parallel-switched PSU’s. Using the redundancy module prevents short circuits affecting the load by checking the wiring from the power supply to the diode.Using the redundancy ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...
Battery module for UB10.24112V 7Ah Valve regulated lead ...
Description:
Battery module for UB10.24112V 7Ah Valve regulated lead acid battery30A Flat-blade fuse for short circuit protectionPanel mounting or DIN-Rail mounting.