Redundancy module for use with Parallel Connection of Two Power Supply Unit Screw

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

A safe redundant system is the result of the parallel connection of two power supply units which are decoupled from one another. To further increase system availability, UNO DIODE provides the solution: decoupling with diode.

Quick and easy installation, thanks to Push-in connection technology
Save energy
Redundant wiring up to the load
Permanent monitoring of redundancy
Consistent redundancy up to the load

Specificaties
Kenmerk Waarde
Accessory Type Redundancy Module
Series UNO-DIODE/5-24DC/2X10/1X20
For Use With Parallel Connection of Two Power Supply Unit
Supply Voltage 30V dc
Input Current Range 20A
Mounting Style DIN Rail Mount
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 45,93
37,20
(excl. BTW)
45,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 37,20
Related Products
Active redundancy module for superior system availability and ...
Description:
Active redundancy module for superior system availability and maximum operational reliability. QUINT S-ORING enables the separate structuring of a redundant system. In combination with the new QUINT POWER power supply, the redundant system is monitored continuously. Consistent redundancy up to ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...
For N+1 and 1+1 Redundant Systems Dual Input ...
Description:
For N+1 and 1+1 Redundant Systems Dual Input with Single Output Suitable for all Power Supplies Only 72mV Voltage Drop at 20A Output Current Only 2.15W Loss at 20A and 6.3W at 40A Output Current 160% (65A) Peak Load Capability ...
The Phoenix Contact QUINT ORING is a DIN ...
Description:
The Phoenix Contact QUINT ORING is a DIN rail mountable active redundancy module with ACB technology and monitoring functions. Using a redundancy module it is possible for two power supply units of the same type connected in parallel on the ...