Redundancy module for use with QUINT POWER Power Supply Screw

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

Active redundancy module for superior system availability and maximum operational reliability. QUINT S-ORING enables the separate structuring of a redundant system. In combination with the new QUINT POWER power supply, the redundant system is monitored continuously.

Consistent redundancy up to the load
Input voltage and decoupling section monitored on a permanent basis
Save energy by decoupling with MOSFET

Specificaties
Kenmerk Waarde
Accessory Type Redundancy Module
Series QUINT4-S-ORING/12-24DC/1X40
For Use With QUINT POWER Power Supply
Mounting Style DIN Rail Mount
Supply Voltage 30V dc
Input Current Range 40A
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-10-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
Was € 135,82
96,00
(excl. BTW)
116,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 96,00
Related Products
The din rail mounting, Trio Diode redundancy modules ...
Description:
The din rail mounting, Trio Diode redundancy modules from Phoenix contact are designed to isolate parallel-switched PSU’s. Using the redundancy module prevents short circuits affecting the load by checking the wiring from the power supply to the diode.Using the redundancy ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...