Selectivity Module for use with SITOP

  • RS-stocknr. 714-1268
  • Fabrikantnummer 6EP1961-2BA21
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AT
Productomschrijving

SITOP PSE200U Selectivity Module

The SITOP PSE200U and SITOP select selectivity modules are the optimal expansion for all 24 V power supplies to distribute the load current to several feeders and to monitor it.

Features and Benefits

Reliable shutdown in case of overload regardless of cable lengths or cable cross-sections 4 load feeders per module with individually adjustable maximum current for each output
Two versions for remote diagnostics: Group signaling contact or single-channel signaling
Evaluation via free-of-charge SIMATIC S7 function blocks (S7-1500/1200/300/400) for modules with single-channel signaling (PSE200U)
LEDs for rapid on-site fault localization
Remote reset possible from a central location (PSE200U)
Simple commissioning thanks to manual switch on/off of outputs (PSE200U)
Sequential connection of feeders to reduce total inrush current
Sealable transparent cover over adjusters for currents and times protects against maladjustment (PSE200U)

Advantages of a selectivity module

A power supply unit (PSU) cannot guarantee a fault-free supply when used on its own. The selectivity module offers reliable detection of overload or short-circuit in the circuit. A selectivity module enables reliable shutdown in case of overload regardless of cable lengths or cross-sections.

Approvals

CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS

Specificaties
Kenmerk Waarde
Accessory Type Selectivity Module
For Use With SITOP
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
105,00
(excl. BTW)
127,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 105,00
Related Products
A safe redundant system is the result of ...
Description:
A safe redundant system is the result of the parallel connection of two power supply units which are decoupled from one another. To further increase system availability, TRIO DIODE provides the solution: decoupling with diode. Quick and easy installation, thanks ...
A safe redundant system is the result of ...
Description:
A safe redundant system is the result of the parallel connection of two power supply units which are decoupled from one another. To further increase system availability, UNO DIODE provides the solution: decoupling with diode. Quick and easy installation, thanks ...
Active redundancy module for superior system availability and ...
Description:
Active redundancy module for superior system availability and maximum operational reliability. QUINT S-ORING enables the separate structuring of a redundant system. In combination with the new QUINT POWER power supply, the redundant system is monitored continuously. Consistent redundancy up to ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...