DIN Rail Mounting Kit for use with SIMATIC PS307, SITOP

  • RS-stocknr. 751-6741
  • Fabrikantnummer 6EP1971-1BA00
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: AU
Productomschrijving

SITOP Accessories

Mounting Bracket

Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for control cabinets with a depth of 320 mm or more.

Mounting Adapter for Standard Mounting Rail

The single phase 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 PSUs are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail EN 60715 35 x 15 is separately available as an accessory.

The 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0 and 6ES7307-1KA02-0AA0 PSUs are variants for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6EP1971-1BA00) for installation on DIN Rail EN 60715 35´15/7.5 is separately available as an accessory.

Connection Plug for Devices with Degrees of Protection IP65 and IP67

For the maintenance free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection. A connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory.

Device Labels

Blank device labelling plates (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.

Specificaties
Kenmerk Waarde
Accessory Type DIN Rail Mounting Kit
For Use With SIMATIC PS307, SITOP
13 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
16,00
(excl. BTW)
19,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,00
5 - 9
€ 15,35
10 +
€ 14,85
Related Products
Ultra compact, fully encapsulated power suppliesSafety Class IIEMI ...
Description:
Ultra compact, fully encapsulated power suppliesSafety Class IIEMI compliance to EN 55022 Class B and FCC level BShort circuit and overload protection4kVac rms input / output isolationMedical safety approval EN 60601-1, UL 60601-1Two package styles: Solder pins for PCB mounting ...
Wide range input for global useSingle-phase, primarily switchedSlim ...
Description:
Wide range input for global useSingle-phase, primarily switchedSlim designGood operational safety due to lengthy mains buffering under full loadPower boost to start difficult loads reliably (power reserve of up to 100%)Parallel circuit to improve power and redundancyWide temperature range = ...
4W to 60W low profile AC/DC encapsulated power ...
Description:
4W to 60W low profile AC/DC encapsulated power supplies with ultra-compact casings. These AC/DC encapsulated power modules have universal inputs and are available with single, dual or triple outputs. There are two mounting options for these AC/DC power supplies; PCB ...
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...