DIN Rail Mounting Kit for use with Robustel GoRugged Devices

  • RS-stocknr. 902-6837
  • Fabrikantnummer ROB DINRAIL MOUNTING
  • Fabrikant Robustel
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

Accessories for Cellular Modem/ Cellular Router - Robustel

Robustel offer a range of accessories for the GoRugged cellular routers and cellular gateways. Including a power supply with an input up to 240 V ac and 12 V dc output at 1.5A. The DC output cable is terminated with individual pins so that they mate with the terminal block connectors that are supplied with the Robustel devices. The power supply comes with the UK, EU, USA and Australian adapters.

There are two types of antennas that are suitable for the Industrial cellular ranges. The quad band GSM stubby R/A type and the magnetic mount multiband antenna. They both come with SMA- male connector and mate with the corresponding router/modem.

The RS232 Serial cable has a DB9 male connector to a DB9 female connector and is 2.5 M in length.

Two types of brackets are suitable for the Robustel Go-Rugged series as the devices have threaded screw holes that match the mounting brackets.

Power Supply: 902-6830
Input voltage range: 100 to 240v ac
Output voltage rated at 12v @ 1.5A

Antenna: 902-6812
Mounts directly on to device
Antenna: Quad Band with SMA-Male Right Angle
Supports 2G & 3G devices

Antenna: 902-6818
Magnetic mount
Supports 2G & 3G
2.5 m coaxial RF cable and SMA (male) connecto

RS232 Serial Cable: 902-6815
Suitable for M1000 XP Gateway devices (2G & 3G)

35 mm DIN Rail mounting bracket: 902-6837
Wall mounting bracket: 902-6834
4 x M3 x 6 mm screws supplied

Wall mounting bracket: Fixing centre: approx. 89 mm

Note

Robustel devices feature either a 2 way or 3 way power-input connector, and are supplied with a matching plug for the connector. They are terminal block type with screws to secure wire or pins.

GSM/GPRS (Mobile Communications) - Robustel

Specificaties
Kenmerk Waarde
Accessory Type DIN Rail Mounting Bracket
For Use With Robustel GoRugged Devices
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
60 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,49
(excl. BTW)
5,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4,49
Related Products
Ultra compact, fully encapsulated power suppliesSafety Class IIEMI ...
Description:
Ultra compact, fully encapsulated power suppliesSafety Class IIEMI compliance to EN 55022 Class B and FCC level BShort circuit and overload protection4kVac rms input / output isolationMedical safety approval EN 60601-1, UL 60601-1Two package styles: Solder pins for PCB mounting ...
Wide range input for global useSingle-phase, primarily switchedSlim ...
Description:
Wide range input for global useSingle-phase, primarily switchedSlim designGood operational safety due to lengthy mains buffering under full loadPower boost to start difficult loads reliably (power reserve of up to 100%)Parallel circuit to improve power and redundancyWide temperature range = ...
4W to 60W low profile AC/DC encapsulated power ...
Description:
4W to 60W low profile AC/DC encapsulated power supplies with ultra-compact casings. These AC/DC encapsulated power modules have universal inputs and are available with single, dual or triple outputs. There are two mounting options for these AC/DC power supplies; PCB ...
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...