Sensirion Differential for Air, Non-Aggressive Gas Pressure Sensor, 62Pa Max Pressure Reading , 4.75 → 5.25 V,

  • RS-stocknr. 774-4094
  • Fabrikantnummer SDP1000-L025
  • Fabrikant Sensirion
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

SDP1000/SDP2000 Low Range Differential Pressure Sensors

Sensirion’s SDP1000/SDP2000 series of low range differential pressure sensors for air and other non-aggressive gases provide fast and reliable measurement with excellent stability. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and HVAC applications. Each differential pressure sensor is individually calibrated and temperature compensated.

Low Differential Pressure Sensors with fast response time

The SDP1108 and SDP2208 devices (123-7134 and 123-7135) feature a reduced response time of 8ms optimised for medical ventilation applications.

5V dc supply operation
0.25 to 4.0V analogue output
Zero offset and excellent long term stability
Insensitive to the mounting orientation

Pressure Sensors, Sensirion

Specificaties
Kenmerk Waarde
Pressure Reading Type Differential
Minimum Pressure Reading -62Pa
Maximum Pressure Reading 62Pa
Accuracy 0.6 %, 2 %
Output Type Analogue
Media Measured Air, Non-Aggressive Gas
Analogue Output 0.2 → 4 V
Electrical Connection 3 Pin SMD Connector
Response Time 40 ms
Maximum Current 5.2 mA
Supply Voltage 4.75 → 5.25 V
Housing Material PPS
IP Rating IP20
Maximum Operating Temperature +60°C
Series SDP1000
Minimum Operating Temperature -10°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
101,56
(excl. BTW)
122,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 101,56
5 - 9
€ 91,40
10 - 24
€ 87,34
25 +
€ 84,30
Related Products
These ultra-low pressure differential sensors provide an output ...
Description:
These ultra-low pressure differential sensors provide an output voltage proportional to applied pressure. They operate from a single positive supply voltage rating at 8V. Signal conditioning results in directly useable outputs and temperature compensation results, in predictable performance over the ...
Honeywell PX3 Series heavy duty pressure transducer is ...
Description:
Honeywell PX3 Series heavy duty pressure transducer is a range of highly configurable pressure sensors that use piezoresistive sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a brass housing. The PX3 Series is fully calibrated and compensated ...
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces ...
Products are screw adjustable but are factory fitted ...
Description:
Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable. As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. ...