Digilent ZedBoard Zynq-7000 SoC Development Kit with XC7Z020-1CSG484CES - 410-248

  • RS-stocknr. 134-6457
  • Fabrikantnummer 410-248
  • Fabrikant Digilent
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Zynq-7000 ZedBoard Development Kit

The ZedBoard is a low-cost development board for the Xilinx Zynq-7000 SoC. The board contains everything necessary to create a Linux, Android, Windows or other OS/RTOS-based design. Several expansion connectors expose the processing system and programmable logic I/Os for easy user access. Take advantage of the Zynq-7000 SoC’s tightly coupled ARM processing system and 7 series programmable logic and create unique and powerful designs. ZedBoard is supported by the www.zedboard.org community website where users can collaborate with other engineers also working on Zynq designs.

• Zynq-7000 SoC XC7Z020-CLG484-1
• On-board MT41K128M16HA-15E:D 512MB DDR3 SDRAM memory
• On-board S25FL256S 256Mbit Quad-SPI serial Flash memory
• 30 x 11mm 128 x 32pixel OLED display panel
• On-board ADAU1761 I²S audio CODEC
• On-board CY7C64225 USB-UART bridge controller
• SD card socket
• On-board USB-JTAG Programming via microUSB connector
• RJ45 socket for 10/100/1000 Ethernet
• USB OTG 2.0 via microUSB connector
• LPC FMC connector
• HDMI 1080p socket
• VGA (12-bit colour) DE15 socket
• 4 x 3.5mm jack sockets for Microphone, Line In, Line Out, Headphones
• 5 x 12-pin Pmod™ expansion connectors
• Reset pushbutton
• Programming pushbutton
• 8 x User slide-switches
• 7 x User pushbuttons
• 8 x User LEDs
• Applications: Video processing, Motor control, Software acceleration, Linux/Android/RTOS development, Embedded ARM processing, General Zynq-7000 SoC prototyping

Supplied with

4GB SD Card, Micro-USB cable, USB Adapter: Male Micro-B to Female Standard-A, Getting Started Guide, Xilinx Vivado DVD, Xilinx License Voucher for Vivado Design Edition tools for ZedBoard designs, US/Euro mains power supply (Requires adapter for UK use: RS 399-6134)

Digilent Zedboard Zynq-7000 Soc Development Kit 410-248

The Digilent ZedBoard Zynq®-7000 is a low-cost development board for the Xilinx Zynq-7000 SoC. This board contains everything necessary to create a Linux, Android, Windows, or other OS/RTOS-based design. Several expansion connectors expose the processing system and programmable logic I/Os for easy user access. ZedBoard is supported by the www. Zedboard. Org community website where users can collaborate with other engineers working on Zynq designs. With the help of ZedBoard and the Zynq-7000 AP SoCs tightly coupled ARM processing system and 7-series programmable logic to create unique and powerful designs.
Zynq-7000 SoC XC7Z020-CLG484-1
Onboard MT41K128M16HA-15E:D 512MB DDR3 SDRAM memory
Onboard S25FL256S 256Mbit Quad-SPI serial flash memory
30 x 11mm 128 x 32px OLED display panel
Onboard ADAU1761 I²S audio CODEC
Onboard CY7C64225 USB-UART bridge controller
SD card socket
Onboard USB-JTAG Programming via microUSB connector
RJ45 socket for 10/100/1000 Ethernet
USB OTG 2.0 via microUSB connector
LPC FMC connector
HDMI 1080p socket
VGA (12-bit colour) DE15 socket
4 x 3.5mm jack sockets for the microphone, line-in, line out, and headphones
5 x 12-pin Pmod™ expansion connectors
Reset pushbutton
Programming pushbutton
8 x user slide-switches
7 x user pushbuttons
8 x user LEDs

Features and Benefits

• Dual-core ARM Cortex™-A9
• 512 MB DDR3
• 256 MB Quad-SPI flash
• Onboard USB-JTAG programming
• Support 10/100/1000 Ethernet
• USB OTG 2.0 and USB-UART

Applications

• Video processing
• Reconfigurable computing
• Motor control
• Software acceleration
• Linux/Android/RTOS development
• Embedded ARM processing
• General Zynq-7000 AP SoC prototyping

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specificaties
Kenmerk Waarde
Classification Development Kit
Kit Name ZedBoard Zynq-7000
Technology SoC
Device Core ARM Cortex A9
Processor Family Name Zynq-7000
Processor Part Number XC7Z020-1CSG484CES
Processor Type SoC
33 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
452,41
(excl. BTW)
547,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 452,41
Related Products
The ADALM1000 module is an easy to use ...
Description:
The ADALM1000 module is an easy to use active learning tool that illustrates the relationships between current, voltage, impedance (resistance, inductance, and capacitance), introducing the fundamentals of electrical engineering. The ADALM1000 augments learning with a personal portable lab when used ...
J-Trace PRO for Cortex-M enables continuous streaming trace ...
Description:
J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce ...
Our BETA touchscreen Platform range is designed and ...
Description:
Our BETA touchscreen Platform range is designed and manufactured in the UK. Our BETA touchscreen HMI range offers great value for money together with excellent engineering and high reliability. We pride ourselves on providing the highest level of technical support ...
4 Kbit and 16 Kbit I²C serial EERAM ...
Description:
4 Kbit and 16 Kbit I²C serial EERAM devicesFollows the published recommended capacitor selection for the EERAM deviceTest points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and 5V operationOn-board ...