Microchip MCP130T-270I/TT, Processor Supervisor 2.62V 3-Pin, SOT-23

  • RS-stocknr. 667-4219
  • Fabrikantnummer MCP130T-270I/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MCP130 Microcontroller Supervisory and Reset Circuit

The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.

Features

Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current

Supervisory & Reset Circuits - Microchip

Specificaties
Kenmerk Waarde
Number of Supervisors 1
Output Driver Active Low, Open Drain
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 3
Maximum Reset Active Time 700ms
Dimensions 2.9 x 1.3 x 0.95mm
Height 0.95mm
Maximum Monitored Voltage 2.7V
Minimum Monitored Voltage 2.62V
Maximum Operating Temperature +85 °C
Length 2.9mm
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 1 V
Width 1.3mm
110 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,349
(excl. BTW)
0,422
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,349
€ 3,49
30 - 90
€ 0,327
€ 3,27
100 +
€ 0,305
€ 3,05
*prijsindicatie
Verpakkingsopties
Related Products
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers ...
Description:
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers with integrated MOSFETs. They operates over a 3. 5V to 36V input voltage range with 42V input transient protection, and can operate in dropout condition by running at 95% duty cycle. The ...
ROHM's LDO regulators continue the trend towards increasing ...
Description:
ROHM's LDO regulators continue the trend towards increasing miniaturization and greater power efficiency and are optimized for power supplies of all types. The broad lineup includes low saturation fixed output types in 1A/2A/0.3A ratings, models with different output voltages and ...
The MIC5233 is a 100mA, highly accurate, low ...
Description:
The MIC5233 is a 100mA, highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination of high input voltage and low ground current makes the MIC5233 ideal for multi-cell Li-Ion battery systems.A μCap LDO design, ...
The STMicroelectronics gate driver is a high voltage ...
Description:
The STMicroelectronics gate driver is a high voltage device manufactured with the BCD6 "OFF-LINE" technology. It is a single-chip half-bridge gate driver for N-channel power MOSFETs or IGBTs. The MOSFET can sink 2.5A and source 2A, making it particularly suited ...