Microchip MCP130T-300I/TT, Voltage Supervisor 2.92V 3-Pin, SOT-23

  • RS-stocknr. 738-6465
  • Fabrikantnummer MCP130T-300I/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

MCP130 Microcontroller Supervisory and Reset Circuit

The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.

Features

Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current

Supervisory & Reset Circuits - Microchip

Specificaties
Kenmerk Waarde
Number of Supervisors 1
Output Driver Active Low, Open Drain
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 3
Maximum Reset Active Time 700ms
Dimensions 2.9 x 1.3 x 0.95mm
Height 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Maximum Operating Temperature +85 °C
Minimum Monitored Voltage 2.92V
Minimum Operating Supply Voltage 1 V
Width 1.3mm
Maximum Monitored Voltage 3V
170 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,349
(excl. BTW)
0,422
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,349
€ 3,49
30 - 90
€ 0,327
€ 3,27
100 +
€ 0,305
€ 3,05
*prijsindicatie
Verpakkingsopties
Related Products
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed ...
Description:
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed Frequency, Synchronous Step-Up DC-DC Converters. Primarily they are designed to offer a compact and highly efficient power supply solution for PIC Microcontrollers in one-, two- and three-cell battery powered applications. The desired ...
The MIC2877 is a compact and highly efficient ...
Description:
The MIC2877 is a compact and highly efficient 2MHz synchronous boost regulator with a 6.5A (typical) switch. It features a bidirectional true load disconnect function that prevents any leakage current between the input and output when the device is disabled ...
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers ...
Description:
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers with integrated MOSFETs. They operates over a 3. 5V to 36V input voltage range with 42V input transient protection, and can operate in dropout condition by running at 95% duty cycle. The ...
ROHM's secondary LDO regulators were designed to maximize ...
Description:
ROHM's secondary LDO regulators were designed to maximize device characteristics and provide stable operation through low power consumption, increased miniaturization, and low noise. 1A fixed output types are offered for local power supplies that feature an output voltage accuracy of ...