LeCroy HVFO-6M-FIBER Test Probe Extension Set, For Use With HVFO Isolated Probe

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Teledyne LeCroy HVFO103 60MHz High Voltage Fibre Optically Isolated Probe and Accessories

The Teledyne LeCroy HVFO103 (RS 136-8330) is a high voltage (HV) fibre-optically isolated 60MHz oscilloscope probe that is designed for the measurement of small signals floating on a high voltage bus in power electronics designs. Optical isolation between the probe tip and the oscilloscope input reduces adverse loading of a device under test. It also reduces noise, distortion, ringing, overshoots, and transients on the measured signal. It far surpasses the measurement capabilities and signal fidelity of both conventional HV differential probes and acquisition systems that rely on galvanic channel-to-channel and channel-to-ground high voltage isolation. Furthermore, it mitigates reliance on dangerous test setups that require floating the oscilloscope and probe, or investments in specialized isolated oscilloscope or data acquisition systems that result in other performance compromises.
The HVFO103 architecture is simple, with a single laser and fibre optic cable providing optical isolation and modulated signal + data communication. Selectable tips are available for various operating voltage ranges. The HVFO103 is small enough to fit in tight spaces, provides the performance required for real-world needs, and is affordable enough to accommodate tight equipment budgets.

Features and Benefits

60 MHz bandwidth
Common-mode (safety) voltage virtually unlimited (optical isolation)
Superior Noise and Rejection
140 dB CMRR
Low loop inductance
Low attenuation
Reduced DUT loading, better pulse response compared to conventional HV differential probes
Selectable tips for from +/-1V to +/-40V
Eliminates need to "float" the oscilloscope
ProBus-compatible with many Teledyne LeCroy oscilloscopes Attenuating tips, fibre optic cable accessories and spare amplifier modulating transmitters are available separately, see below.

HVFO100 Attenuating tips:

136-8323: 1X attenuation 136-8325: 5X attenuation
136-8324: 20X attenuation

HVFO-FIBER Fibre optic cable accessories:

136-8326: 1 metre 136-8327: 2 metre
136-8328: 6 metre

Note

Spare HVFO103-XMITTER amplifier/modulating transmitters are available, please see RS 136-8331. Having a spare permits constant operation - charge one while the other is being used.

Supplied with

1 x Amplifier/modulating transmitter, 1 x demodulating receiver, 1.1 metre fibre optic cable, 1 x USB charing cable and 1 x micro gripper set.

Specificaties
Kenmerk Waarde
Accessory Type 3 m Fiber Optic Cable Accessory
For Use With HVFO Isolated Probe
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-04-2020, met een levertijd van 1 werkdag.
Prijs Each
245,00
(excl. BTW)
296,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 245,00
Related Products
The PicoScope 4000 series high-precision PC oscilloscopes are ...
Description:
The PicoScope 4000 series high-precision PC oscilloscopes are designed to meet the requirements of modern electronic engineering servicing, design and debugging. With their high input resolution, they can detect or trigger on voltage changes of less than 50 μV. This ...
Teledyne LeCroy WaveSurfer 10 Bus Decode Option WS10-DPHYBUS ...
Description:
Teledyne LeCroy WaveSurfer 10 Bus Decode Option WS10-DPHYBUS D is for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to the oscilloscope, simplifying design ...
These probes feature a shrouded 4 mm socket ...
Description:
These probes feature a shrouded 4 mm socket allowing connection to a measurement instrument using a 4 mm "banana" plug test lead. The sprung hook opens up to 10 mm to hold items such as components, IC legs or small ...
Teledyne LeCroy has a wide variety of world ...
Description:
Teledyne LeCroy has a wide variety of world class probes and amplifiers to complement its product line. From the ZS high impedance active probes to the WaveLink differential probing system which offers bandwidths up to 25 GHz, Teledyne LeCroy probes ...