Electrolube ER2074 White 250 g Adhesive Bag
- RS-stocknr.:
- 160-8469
- Artikelnummer Distrelec:
- 110-41-220
- Fabrikantnummer:
- ER2074RP250GR
- Fabrikant:
- Electrolube
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 24,77
(excl. BTW)
€ 29,97
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 59 stuk(s) vanaf 02 maart 2026
- Plus verzending 61 stuk(s) vanaf 02 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 5 | € 24,77 |
| 6 - 14 | € 23,81 |
| 15 + | € 23,29 |
*prijsindicatie
- RS-stocknr.:
- 160-8469
- Artikelnummer Distrelec:
- 110-41-220
- Fabrikantnummer:
- ER2074RP250GR
- Fabrikant:
- Electrolube
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Electrolube | |
| Product Type | Adhesive | |
| Colour | White | |
| Package Type | Bag | |
| Product Form | Liquid | |
| Package Size | 250 g | |
| Trade Name | ER2074 | |
| Setting Time | 5h | |
| Cure Time | 24 h | |
| Standards/Approvals | No | |
| Viscosity | 200000 mPa.s | |
| Maximum Operating Temperature | 130°C | |
| Minimum Operating Temperature | -40°C | |
| Base Chemical | Epoxy Adhesive | |
| Alles selecteren | ||
|---|---|---|
Merk Electrolube | ||
Product Type Adhesive | ||
Colour White | ||
Package Type Bag | ||
Product Form Liquid | ||
Package Size 250 g | ||
Trade Name ER2074 | ||
Setting Time 5h | ||
Cure Time 24 h | ||
Standards/Approvals No | ||
Viscosity 200000 mPa.s | ||
Maximum Operating Temperature 130°C | ||
Minimum Operating Temperature -40°C | ||
Base Chemical Epoxy Adhesive | ||
- Land van herkomst:
- GB
Electrolube Epoxy Resin
The Electrolube 250g epoxy resin is a flame retardant, thermally conductive, 2-part potting and encapsulating compound. This technology used is of the ’clean’ type, leading to relatively low toxicity fumes and low smoke emission.
Features and Benefits
•
Very high thermal properties
• Entirely free of grinding fillers
• Low heat emission upon hardening
• High thermal conductivity; ideal for heat dissipation within LED applications
• Good environmental protection; resistant to water and chemical
• Does not contain abrasive fillers; low wear on dispensing machinery
• Setting time is 5 hours
• Cure time at 23°C is 24 hours
• Shelf life of 24 Months
• Flame retardant
• The operating temperature ranges between -40°C and 130°C
Applications
• LEDs
•
Ceramic
• Rubber
• Plastic
• Glass
Casting Compound, Epoxy Resin ER 2074, ER 2183
Casting compound for encapsulating electronic assemblies
Vibration isolation and prevention of stress exposure
ER 2074 RS stock no. 160-8469 — very high thermal transfer properties (thermal conductivity of 1.26W/mK)
Entirely free of grinding fillers
Low heat emission upon hardening
At a storage or transport temperature below 10 °C, the product may contain small clots as a result of crystallisation, which impedes its use with dispensing systems. Upon heating to max. 50 °C, crystals dissolve again
ER 2183 RS stock no. 337-5919 — high thermal transfer properties, oil-resistant