HellermannTyton Cable Tie Gun, 2.5 → 4.8mm Capacity

  • RS-stocknr. 187-8882
  • Fabrikantnummer 110-20006 MK20-PL-BU
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MK20/MK21 Bundling Tools

Lightweight and durable tools giving simple and problem free tensioning of cable ties
Lightweight design lessens operator fatigue
Squeeze trigger to tension, twist to cut
MK20 1878882 - Will accept cable size ties 2.5 - 4.8 mm
MK21 1878898 - Will accept cable size ties 4.8 - 7.6 mm

Note

For a close cut the nose of the hand tool needs to be butted right up against the head of the tie.

Specificaties
Kenmerk Waarde
Cable Tie Capacity 2.5 → 4.8mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
148 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was € 43,84
35,07
(excl. BTW)
42,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 35,07
15 - 49
€ 33,30
50 +
€ 31,55
Related Products
A clip that is chemical and weather-resistant.For Colson™ ...
Description:
A clip that is chemical and weather-resistant.For Colson™ installations for cables from 13 → 38 mm diameter or smooth rigid insulating tubes from 16 mm → 32 mm diameter.Anti-UV protectionMounted with screw-in pin, metal lug, screw, nail gun.
An ergonomic tool with adjustable tension and automatic ...
Description:
An ergonomic tool with adjustable tension and automatic cutting, ideally suited for efficient installing of all kinds of plastic cable ties in a wide variety of industrial and construction applications. Cable tie cut flush to the head360° rotating nose allowing ...
High-quality fitting tool to reduce operator fatigue to ...
Description:
High-quality fitting tool to reduce operator fatigue to a minimum.The tension can be adjusted by an adjusting knob on the back of this tool. A unique tension release system eliminates any danger of excessive tension.An integral cutting blade automatically cuts ...
In separate operation, the cable tie is tensioned, ...
Description:
In separate operation, the cable tie is tensioned, closed and cut directly at the head. By simply replacing the facing plate, the meter can be easily changed for the differing tape widths (6 and 8 mm). Locking pin for the ...