RS PRO Fused Test Lead Kit, CAT III
- RS-stocknr.:
- 212-966
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
- RS-stocknr.:
- 212-966
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
RS Fused Test Leads 600V CAT III
These 600V r.m.s. rated fused test leads meet the HSE GS38 safety recommendation.
A 500mA, 50kA breaking capacity fuse is fitted to provide protection against electrical arcing being sustained through the test leads
Probe tips are shrouded leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors
Double insulated silicon rubber cable indicates wear and damage to the leads via white inner layer of insulation
Safety crocodile clips with finger guards are available separately
Probe tips are shrouded leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors
Double insulated silicon rubber cable indicates wear and damage to the leads via white inner layer of insulation
Safety crocodile clips with finger guards are available separately
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets are also available
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets
Note
Although suitable for use with most multimeters this lead set is not recommended for use with Thurlby 1905, 1503, Thandar digital, Fluke 8010, 8050, Beckman DM25XL, DM93, DM98, AVO8, AVO2001 and ITT MX112 Multimeters.
Replacement fuses can be purchased please see RS Stock no. 161-1530
Standards
GS38
Specificaties
Kenmerk | Waarde |
|---|---|
| Lead Type | Test Lead Kit |
| Connector Type | Shrouded |
| Fused | Yes |
| Lead Length | 1.2m |
| Safety Category Voltage | 600V |
| Safety Category | CAT III 600 V |
| Safety Category Level | CAT III |