Eaton Switched Neutral, For Use With P3.../E Series, P3.../EA Series

  • RS-stocknr. 262-3784
  • Fabrikantnummer N-P3E
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Lockable in the 0/OFF position, with up to three padlocks
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Standards

IEC (EN60) 947, IEC (EN60) 204

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Accessory Type Switched Neutral
For Use With P3.../E Series, P3.../EA Series
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,80
(excl. BTW)
14,28
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 11,80
5 - 11
€ 11,44
12 +
€ 11,08