Mascot DC-DC Converter, 13.6V dc/ 6A Output, 18 → 32 V dc Input, 81W, Mounting Bracket, +60°C Max Temp -20°C Min

RS-stocknr.:: 397-9583
Artikelnummer Distrelec:: 169-88-562
Fabrikantnummer:: 5060000040
Fabrikant:: Mascot

Mascot DC-DC Converter, 13.6V dc/ 6A Output, 18 → 32 V dc Input, 81W, Mounting Bracket, +60°C Max Temp -20°C Min

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 67,66

(excl. BTW)

€ 81,87

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

Plus verzending 7 stuk(s) vanaf 19 januari 2026
Plus verzending 22 stuk(s) vanaf 19 januari 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 67,66
5 - 9	€ 65,62
10 - 24	€ 63,59
25 - 49	€ 61,56
50 +	€ 59,53

*prijsindicatie

RS-stocknr.:: 397-9583
Artikelnummer Distrelec:: 169-88-562
Fabrikantnummer:: 5060000040
Fabrikant:: Mascot

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Mascot
	Output Voltage	13.6V dc
	Input Voltage Range	18 → 32 V dc
	Power Rating	81W
	Input Voltage Nominal	24 V dc
	Output Current	6A
	Mounting Type	Mounting Bracket
	Width	98mm
	Depth	49mm
	Length	60mm
	Load Regulation	0.02
	Minimum Temperature	-20°C
	Maximum Temperature	+60°C

	Alles selecteren
	Merk Mascot
	Output Voltage 13.6V dc
	Input Voltage Range 18 → 32 V dc
	Power Rating 81W
	Input Voltage Nominal 24 V dc
	Output Current 6A
	Mounting Type Mounting Bracket
	Width 98mm
	Depth 49mm
	Length 60mm
	Load Regulation 0.02
	Minimum Temperature -20°C
	Maximum Temperature +60°C

Land van herkomst:: CN

27W to 276W Linear & Switch Mode, DC to DC Battery Voltage Converters

Wide input voltage range
Regulated output
Input protected against reverse polarity
Input fuse protection
Ouput overvoltage protection
EMC to EN50081-1/50082-1
12Vdc and 24Vdc input types are 'E' approved for vehicle applications

Additional features on switch mode units

Electrical isolation between input/output/chassis
Short circuit proof
Thermal protection

Note

All have 6.3mm push-on terminals apart from stk nos 397-9583 and 397-9599 which have screw terminals.
Linear units have a common negative connection between input and output.
Switch Mode units have electrical separation between input/output/chassis, except stock nos. 397-9583, 452-8603, 218-4835, 243-1131 & 397-9599 which are not-isolated.

Caution

The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture.