Maxon 220310 Connector

  • RS-stocknr. 420-5091
  • Fabrikantnummer 220310
  • Fabrikant Maxon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

Motor Connection Units

These units facilitate the connecting of Flat brushless motors with Flex connectors such as stock no. 420-5192 or similar motors to a controller
This unit has a Flex connector at one end to accommodate the motor lead and a screw terminal block at the other for the wiring to the controller
Two alternative units available
Use 4 way for use with motors without sensors
Use 8 way for use with motors with sensors

Specificaties
Kenmerk Waarde
Accessory Type Connector
For Use With Motor
Length 21.5mm
Width 12.4mm
Depth 13mm
Dimensions 21.5 x 12.4 x 13 mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
22,20
(excl. BTW)
26,86
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 22,20
5 - 9
€ 21,54
10 +
€ 20,87
Related Products
For controlling, displaying current values, adjusting or configuring ...
Description:
For controlling, displaying current values, adjusting or configuring drives Schneider Electric presents the VW3 A1 a compact user-friendly display terminal that is easy to use. A large number of the Altivar range are compatible with this accessory, including; Altivar 312, ...
Multi-drop serial communication suitable for use with programmable ...
Description:
Multi-drop serial communication suitable for use with programmable step drives ST5-Si (stock no. 455-845) and ST10-Si (stock no. 455-863) for up to 32 drives via RS-485 interface to:. Send commandsChange parametersInterrogate the drive.
Surface or flush mountConnects directly to programmable drives ...
Description:
Surface or flush mountConnects directly to programmable drives (ST5-Si, stock no. 455-845 and ST10-Si, stock no. 455-863) using standard programming cablePower supplied direct from driveEasy to program using SiTM Programmer software4 line, 20 character/line LCDNEMA 4//12 rating (dustproof and drip-proof ...
L' bracket - required to secure the remote ...
Description:
L' bracket - required to secure the remote controller, alternatively din rail can be used.Side support - required to secure actuator base to work surface, two in a pack.Floating bracket - can be fitted to the external guide to give ...