Keenserts Thread Repair Insert, M10 x 1.5, Drill Size 13.5mm

Bekijk alle Thread Repair Inserts
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
RS-stocknr.:
668-4702
Fabrikantnummer:
KNHM10X1.5
Fabrikant:
Keenserts
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Keenserts

Thread Size

M10 x 1.5

Drill Size

13.5mm

Thread Length

16mm

Vrijgesteld

Land van herkomst:
DE

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel

Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials

In thread repair use, the defect thread can be replaced with the same nominal diameter

Significantly increases load capability in weaker materials

Special keys lock the Keensert into place eliminating rotation

Easy to install no special taps required and no tangs to remove

High resistance to torque out and pull out

Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Gerelateerde Links