TE Connectivity 20 Way Female SFP+ Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity SFP (Small Form Factor Pluggable) SMT Connectors

SFP (Small Form Factor Pluggable) SMT PT (pluggable transceiver) connectors for use with SFP cages to form part of high-speed pluggable I/O interface. The SFP system is designed for increased functionality and to meet increasing bandwidth demands. SFP connectors support applications up to 4 Gbit/s and SFP+ connectors support applications up to 16 Gbit/s. These SFP PT connectors have a reliable 20 position interface with improved signal integrity with contact spacing on a 0.8 mm centreline. Each of these SFP connectors consists of a housing with right angle SMT contacts. The housings incorporate a card entry slot that accepts a 1.0 ±0.1 mm thick integrated circuit card. Alignment posts provide connector stability on the PCB and board standoffs allow easy PCB cleaning after soldering. Part number 1367073-1 is an SFP connector with 0.38 μm gold plated contacts
Part number 1367073-2 is an SFP connector with 0.76  μm gold plated contacts
Part number 1888247-1 is an SFP+ compliant connector with 0.76  μm gold plated contacts
Part number 1888247-2 is an SFP+ compliant connector with 0.38  μm gold plated contacts

Features and Benefits

• SFP High-speed pluggable I/O interface
• Supports data rates of up to 4 Gbit/s (SFP) and up to 16 Gbit/s (SFP+)
• Reliable 20 position interface for increased signal integrity
• Card entry slot for 1.0 ±0.1 mm IC card
• Alignment posts for PCB stability
• Board standoffs for easy PCB cleaning

Product Application Information

These SFP high-speed pluggable I/O connectors are for use in applications that require a high-speed data rate. Applications include switches, routers, servers, hubs, storage, controllers and Network Interface Cards

SPF Cage

Specificaties
Kenmerk Waarde
Type SFP+
Gender Female
Number of Ports 1
Number of Contacts 20
Contact Material Phosphor Bronze
Contact Plating Gold over Nickel
Housing Material Liquid Crystal Polymer
Termination Method Solder
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
220 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,97
(excl. BTW)
2,38
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 1,97
25 - 99
€ 1,60
100 +
€ 1,53
Verpakkingsopties
Related Products
AMP-LATCH Novo wire to board IDC ribbon cable ...
Description:
AMP-LATCH Novo wire to board IDC ribbon cable connectors with centre and military polarized centres and a 2.54 x 2.54 mating grid for 1.27mm pitch ribbon cable. These AMP-LATCH Novo IDC ribbon cable connectors are made from UL 94V-0 thermoplastic ...
Board to wire connector range, 1mm contact pitch,Low ...
Description:
Board to wire connector range, 1mm contact pitch,Low profile design with a mating height above the PCB of 5.8mm,Mechanism to prevent mis-insertion. • Contact pitch 1 mm• Electrical connection wipe• Beige Crimping Housing• Polyamide UL94V-0.
This range of 2.54 mm pitch TE Connectivity ...
Description:
This range of 2.54 mm pitch TE Connectivity AMPMODU™ Locking Clip Receptacle Housings have Self-retaining contacts to provide permanent connection integrity with quick connect and disconnect for fast, easy installation with no additional locking hardware required. Mates with 0.64mm2 postsSingle- ...
A series of zQSFP+ stacked receptacle cage assemblies ...
Description:
A series of zQSFP+ stacked receptacle cage assemblies with integrated connectors supplied by TE Connectivity. The z Quad small form –factor pluggable plus range of products are designed for applications in the networking,telecommunication and data centre industries. The next generation ...