Pluto GATE-D2 DeviceNet Gateway, 24 V dc

  • RS-stocknr. 733-4849
  • Fabrikantnummer 2TLA020071R8200
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Pluto Gateways For Network Connection

The gateways are devices for transfer of data in both directions between the Pluto bus and other fieldbuses. They are made in these versions; GATE-P1 for Profibus-DP (733-4836), GATE-D1 for DeviceNet (733-4849), GATE-C1 for CANopen (733-4830), GATE-E1 for Ethernet using Modbus TCP, EtherNet/IP (EIP) or PROFINET (733-4842). A second usage for GATE-D1 and GATE-C1 is as a CAN-bridge (repeater) which transfers CAN telegrams between two CAN-buses. This can be useful when long cables are needed. With CANbridge the usage is not limited to any special protocol such as the Pluto CAN bus system, but it can be used for most CAN bus systems.

All gateways from ABB are mounted on a 35 mm DIN rail
24 Vdc operating voltage
The CAN bus and PROFIBUS are galvanic isolated from each other and from the 24 Vdc supply
The bus connectors have terminals for connection of a cable shield

Specificaties
Kenmerk Waarde
Range Pluto
Series GATE-D2
Type Gateway
For Use With DeviceNet
Supply Voltage 24 V dc
Field Bus Communication Type DeviceNet
Mounting Style DIN Rail
Dimensions 101 x 22.5 x 119 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
379,10
(excl. BTW)
458,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 379,10
Related Products
The Pilz PNOZ series mc3p Profibus comms module ...
Description:
The Pilz PNOZ series mc3p Profibus comms module has a PROFIBUS-DP Fieldbus interface. It has Fieldbus type as a slave. It is equipped with a female 9-pin D-Sub connector. The station addresses from 0 to 99 can be selected via ...
For the integration of Flexi Soft data into ...
Description:
For the integration of Flexi Soft data into an existing PLC, up to two gateways can be added to a systemThe gateways provide I/O status and Error/Status messagingNon-safety related information can be sent to the Flexi Soft from the networkAddressing ...
The 440R-ENETR network interface allows Guardmaster Safety Relays ...
Description:
The 440R-ENETR network interface allows Guardmaster Safety Relays (GSR) with embedded optical bus technology to seamlessly communicate on an EtherNet/IP network. The E/IP Interface gathers information from the GSR safety relays and helps minimise unplanned downtime and increase start-up efficiency. ...
The samosPRO Compact is suitable for monitoring non-contact ...
Description:
The samosPRO Compact is suitable for monitoring non-contact safety sensors, emergency off buttons, protective door switches and door closures, two-hand controls as well as testable safety light barriers, light curtains and laser scanners. Not only is it suitable for use ...