Hi-Force HP110, Single Speed, Hydraulic Hand Pump, 1.0L, 250mm Cylinder Stroke, 700 bar
- RS-stocknr.:
- 807-889
- Fabrikantnummer:
- HP110
- Fabrikant:
- Hi-Force
Subtotaal (1 eenheid)*
€ 348,12
(excl. BTW)
€ 421,23
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- 7 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 348,12 |
*prijsindicatie
- RS-stocknr.:
- 807-889
- Fabrikantnummer:
- HP110
- Fabrikant:
- Hi-Force
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hi-Force | |
| Maximum Operating Pressure | 700 bar | |
| Single Or Two Speed | Single | |
| Pump Type | Hand | |
| Usable Oil Capacity | 1.0L | |
| Cylinder Stroke | 250mm | |
| Displacement per Stroke 1st Stage | 2.4cm³ | |
| Maximum Handle Effort | 50kg | |
| Dimensions | 560 x 145 x 135mm | |
| Weight | 5.6kg | |
| Height | 135mm | |
| Width | 145mm | |
| Length | 560mm | |
| Alles selecteren | ||
|---|---|---|
Merk Hi-Force | ||
Maximum Operating Pressure 700 bar | ||
Single Or Two Speed Single | ||
Pump Type Hand | ||
Usable Oil Capacity 1.0L | ||
Cylinder Stroke 250mm | ||
Displacement per Stroke 1st Stage 2.4cm³ | ||
Maximum Handle Effort 50kg | ||
Dimensions 560 x 145 x 135mm | ||
Weight 5.6kg | ||
Height 135mm | ||
Width 145mm | ||
Length 560mm | ||
Vrijgesteld
- Land van herkomst:
- GB
Hydraulic Hand Pump
Piston-type hand pumps offer completely self-contained units for instant operation. Each pump consists of a pre-filled oil reservoir, pump head with external load release valve, and an operating lever. The two-speed model HP227 (807-895) enables rapid cylinder rod advancement until load contact, and then slows as the lift begins. Each pump is compatible with our range of high-pressure cylinders, and can operate one or more cylinders dependant on pump usable oil capacity and cylinder oil capacity. Each pump is tested to 125% of its working pressure and is issued with a manufacturers test certificate and instruction leaflet. The outlet connection is 3/8in. NPTF.
Note
Seal kit is only for stock no 807-889, HP110 hand pump.
Warning
Safety Note – High-pressure hydraulic equipment can work at extremely high pressure, and careful attention should be paid to working pressures when choosing accessories.
Pumps
Hand and air operated hydraulic pumps with load release valves and a maximum working pressure of 700 bar. To enable pump maintenance or repair a service/repair kit is available separately.