Siemens 3SB3 Enclosed Push Button for use with 3SB3 Series

  • RS-stocknr. 453-3396
  • Fabrikantnummer 3SB3901-0AC
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Contact Block Adaptors

Pushbutton and selector switch / keyswitch versions available
Selector switch / keyswitch version has thrust pads for knob, lock, and twin pushbuttons for actuating the centre contact

PHASE OUT NOTIFICATION

This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.

Specificaties
Kenmerk Waarde
Accessory Type Holder
For Use With 3SB3 Series
Series 3SB3
93 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
107 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
0,60
(excl. BTW)
0,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 0,60
Related Products
All the items you need for a working ...
Description:
All the items you need for a working pilot light in the convenience of a single stock number. Fitted with metal latch and integrated LED module.For other colours/voltage combinations please select component parts.
The TW series from Idec features a traditional ...
Description:
The TW series from Idec features a traditional NEMA style switch. Modular construction with Snap-on contacts allows for great flexibility in configuration. Models include illuminated or non-illuminated pushbuttons, pilot lights, selectors, key switches and emergency stop switches. Corrosion resistant octagonal ...
The CW series gives a sleek, stylish image ...
Description:
The CW series gives a sleek, stylish image to your machines or control panels. The surface is safer with less chance of unexpected operation or accidents by hitting the projections, and also is cleaner with less dust build-up. Flush silhouette ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...