Moflash PB135 NO/NC Enclosed Push Button, IP66 81mm Red GRP 135mm +70°C -40°C 4 Red 135mm

  • RS-stocknr. 901-0680
  • Fabrikantnummer PB135SNNKNFATRD
  • Fabrikant Moflash
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Moflash PB135 Explosion Proof Pushbutton

The PB135 is a GRP pushbutton which has been approved for use in potentially explosive atmospheres and harsh environmental conditions. Typical applications are Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations. It is ideally suited for use in fire alarm systems. The PB135 is compatible for use with a PLC, DCS and ESD systems via 4-20mA output. The design of this pushbutton allows for termination inside the unit.

Approved by ATEX, IECEx
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB )
Zones 1, 2, 21 & 22
Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54
Dustproof & Weatherproof
IP66 protection
Red (RAL3001)
Glass Reinforced Plastic (GRP)
RoHS compliant

Specificaties
Kenmerk Waarde
Series PB135
Number of Cutouts 4
Push Button Colour Red
Push Button Material GRP
Enclosure Colour Red
Contact Configuration NO/NC
Enclosure Material GRP
IP Rating IP66
Push Button Actuation Self Reset
Length 135mm
Width 135mm
Depth 81mm
Minimum Operating Temperature -40°C
Hazardous Area Certification ATEX, IECEx
Maximum Current 6 A dc, 11 A ac
Maximum Operating Temperature +70°C
Maximum DC Voltage 30V
Maximum AC Voltage 250V
Terminal Type Screw
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
277,89
(excl. BTW)
336,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 277,89
Related Products
Complete emergency stop units units from the Siemens ...
Description:
Complete emergency stop units units from the Siemens 3SB3 series comprising of mushroom button actuator, body and contact block. Plastic body40mm diameter mushroom buttonPull to unlatch mechanismSpring loaded terminals or screw connection versions available.
Siemens extremely rugged IP69K push button complete units ...
Description:
Siemens extremely rugged IP69K push button complete units in high-grade plastic. On these new models, the electrical module is permanently installed and is only secured by the holder.Available in a variety of colours, illuminated or non-illuminated style. Easy installationSuitable for ...
Green and red 22mm diameter, spring return double ...
Description:
Green and red 22mm diameter, spring return double insulated bezel push buttons Stop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactI/O with red LED pilot light available ’STOP’ ’START’; version has marking on legend ...
Flush Green and flush red spring return pushbuttonStop ...
Description:
Flush Green and flush red spring return pushbuttonStop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactEach actuator will accept an additional contact block (see accessories)Double insulatedIP65 ratedPolycarbonate construction.