Red Square Push Button Lens for use with A8 Series

  • RS-stocknr. 664-812
  • Fabrikantnummer AL8Q-LK1-R
  • Fabrikant Idec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

8mm Sub-miniature Illuminated Push-button Switches

8mm contact indicators for panel mounting
LED illumination, Suitable LEDs are supplied separately
Indicators are available in both square and round styles
Solder Tab terminals

LEDs

A range of LEDs specifically for use with this sub-miniature indicator series
Current should be limited to 20mA by use of a suitable external resistor as detailed at the beginning of the Optoelectronics/Indicators section. VF @ IF 20mA=1.7V (red), 2.1V (green) and 2.2V (yellow)

Note: When not illuminated, the green LED appears to be yellow.

Lenses

Two-part lenses comprising a diffuser and a coloured transparent front cover. Diffuser may be marked to indicate switch function, etc

Note

Square and round bezel indicators do not include a lens, switch or LED. Suitable lenses need to be ordered separately.

Specificaties
Kenmerk Waarde
Accessory Type Lens
For Use With A8 Series
Lens Colour Red
Lens Shape Square
155 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,13
(excl. BTW)
2,58
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
€ 2,13
€ 10,65
75 - 245
€ 2,01
€ 10,05
250 - 495
€ 1,346
€ 6,73
500 +
€ 1,29
€ 6,45
*prijsindicatie
Related Products
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions. Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section.
Sleek flush mount designStandard bezel with 16mm hole ...
Description:
Sleek flush mount designStandard bezel with 16mm hole size also availableBright LED illuminationFlush Mount: Just 34.9mm depth behind the panelStandard Mount: 27.9mm depth behind the panel3PDT contact block available5A contact ratingsMetallic or black plastic bezelsIlluminated pushbuttons, pushbuttons, pilot ...
Flush bezel projects only 2 mm from front ...
Description:
Flush bezel projects only 2 mm from front of panel. Standard bezel with only a panel depth of 27.9 mm. Removable contact blocks ideal for single board mounting. Pushbuttons, selector switches, and key selector switches with up to 3PDT contacts.Wave ...