Push Button for use with Stop Switches

  • RS-stocknr. 787-4722
  • Fabrikantnummer EUK-704.927.4
  • Fabrikant EAO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

EAO 04 Series Stop Switch and Accessories

From EAO, the 04 Series of Twist release stop-switches are designed to prevent "teasing" of the actuator which can result in premature contact operation. The design also eliminates the possibility of the push button action being blocked by lodged foreign bodies. The actuator requires a contact block to complete the switch, see stock no 7874729. For a suitable protective shroud see stock no 7874722.

• 22.5mm panel cut out diameter
• Arrow markings on button face
• Front protection IP65

Specificaties
Kenmerk Waarde
Accessory Type Shroud
For Use With Stop Switches
34 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
63,47
(excl. BTW)
76,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 63,47
10 - 24
€ 54,89
25 - 49
€ 49,26
50 - 99
€ 45,01
100 +
€ 41,20
Related Products
The A165E series of emergency stop switches feature ...
Description:
The A165E series of emergency stop switches feature a modular construction that allows the switch to be separated for easy wiring but still benefit from the easy handling of a one piece unit. The direct opening mechanism of this E-stop ...
The M22 series from Eaton offers a wide ...
Description:
The M22 series from Eaton offers a wide range of attractive, ergonomically designed illuminated and non-illuminated pushbuttons, selector switches, key switches, push-pulls, alternate action and twist-to-release operators. • Also sits within the RMQ-Titan range with drilling dimensions of 22.5 mm• ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...
The range of 84 was introduced to satisfy ...
Description:
The range of 84 was introduced to satisfy demands of both equipment builders and users. Typical usage covers the following areas: machinery and process control equipment, including production lines, cranes, robots, moving platforms, as well as security systems and emergency ...