2-pole on-off switch Latching Push Button Switch, IP54, 22.2 x 30.4mm, Panel Mount

  • RS-stocknr. 741-0779
  • Fabrikantnummer 1670.5202
  • Fabrikant Marquardt
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

Marquardt 1670 Series Push Button Switches

Marquardt 1670 series double pole push button switch. The 1670 is a neon illuminated 230Vac push button switch with a green actuator which has an internal gasket that gives the actuator a rating of IP54. The Marquardt 1670 on/off push button switch is suitable for use in Class II appliances.

Contact distance ≥3mm
Operating force approximately 8N
UL 94 V-2 flammability
Mechanical life 50,000 operations

Note

The current rating and life expectancy figures quoted are nominal, please see datasheet for further ratings.

Approvals

ENEC

Marquardt Push Button Switches

Specificaties
Kenmerk Waarde
Switch Operation Latching
Mounting Type Panel Mount
Illuminated Yes
Contact Configuration Double Pole Double Throw (DPDT)
Panel Cut Out Size 22.2 x 30.4mm
LED Colour Green
IP Rating IP54
Actuator Colour Green
Contact Current Rating 16 A @ 250 V ac
Terminal Type Tab
Case Colour Black
155 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was € 17,30
13,06
(excl. BTW)
15,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 13,06
10 - 24
€ 12,41
25 - 49
€ 11,62
50 +
€ 10,71
Related Products
Professional range of Bulgin vandal resistant non illuminated ...
Description:
Professional range of Bulgin vandal resistant non illuminated push button switches from the MP series. Contact Form - SPST or DPCOMounting Style - Panel or Through HoleTermination Style - Screw or SolderBody Material - Stainless Steel or Chrome Plated BrassVarious ...
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions. Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section. Each switch is supplied with one contact block ...
Illuminated rectangular push button switches with either momentary ...
Description:
Illuminated rectangular push button switches with either momentary or latching actionSwitches that do not have red or green neon illumination require a 6mm wedge bulb, see typically stock no 655-9665Switches have double-pole-double-break normally open contacts with 4.75´0.5mm blade terminalsSuitable for ...
This Emergency Stop (E-stop) switch from our own ...
Description:
This Emergency Stop (E-stop) switch from our own RS PRO brand is designed to fit industry standard 16mm diameter cut-out in panels with a thickness between 0.5 and 5mm. Each E-stop switch is provided pre-assembled with a 1NO/1NC + 1NO/1NC ...