Mounting Kit for use with Unicase Enclosures

  • RS-stocknr. 769-4996
  • Fabrikantnummer M6000035
  • Fabrikant METCASE
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Instrumet 19in. Case

A stylish 19" instrument case designed for mounting 3U subracks, chassis or front panels. The desktop version of these instrument cases have ABS side handles whereas the portable version has a tilt/swivel carry handle. Manufactured in aluminium and supplied fully assembled.

Fully assembled 19in. case available as a desktop or portable version
Front / rear bezel in mid-grey (RAL 7040)
Top cover, base and rear panel in light grey (RAL 7035)
Chassis supports
4 ABS tilt feet

Specificaties
Kenmerk Waarde
Type Mounting Kit
For Use With Unicase Enclosures
Material ABS, Aluminium
Thread Size M6
Quantity 12
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
141 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,83
(excl. BTW)
4,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 3,83
10 - 14
€ 3,66
15 +
€ 3,52
Related Products
Build your own mobile robot with a BASIC ...
Description:
Build your own mobile robot with a BASIC Stamp 2 microcontroller brain. Follow the clear, step-by-step instructions and illustrations in the included book: 'Robotics with the Boe-Bot'. No programming or electronics experience is needed.The Boe-Bot robot takes about 1-2 hours ...
Make your Arduino the on-board brain of a ...
Description:
Make your Arduino the on-board brain of a mobile robot and learn robotics, electronics and programming with this versatile kit and its accompanying step-by-step lessons. The Board of Education Shield plugs into your own Arduino (not included) and mounts on ...
Build and program two high-quality SumoBot® Robots designed ...
Description:
Build and program two high-quality SumoBot® Robots designed to wrestle in the mini-sumo competition ring (#27404), included in the kit)! The electronics consists of a surface-mounted BASIC Stamp 2 module and an array of infrared sensors to detect your opponent ...
Schneider Electric XB4 Flush Mounting Kits provide a ...
Description:
Schneider Electric XB4 Flush Mounting Kits provide a means of flush mounting Harmony XB4 series push buttons and selector switches. The flush mounting kits provide a quick and easy installation in a 30.5 mm hole, compatible with 22 mm devices.Flush ...