Arrow Electronics ARIS EDGE 32MHz Bluetooth, Thread, ZigBee Development Board for IoT Applications

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

ARIS EDGE board, developed by RELOC for Arrow Electronics, is a ready-to-use Internet of Things (IoT) hardware and software platform that enables users to get their IoT applications up and running quickly, exploiting the Renesas Synergy development framework. Based on Renesas Synergy S1 MCU, the ARIS EDGE board has a host of features that equip it for smart sensing and IoT operations.

Multi-protocol module supporting BLE, Thread and ZigBee stacks
High performance MEMS 9-degrees-of-freedom IMU with sensor fusion capabilities.
Up to 32-MHz core clock
128 kB code flash
16 kB SRAM
micro-USB connector providing access to the native S1 USB peripheral
Ambient light sensor

Specificaties
Kenmerk Waarde
RF Technology Bluetooth, Thread, ZigBee
Kit Classification Development Board
For Use With IoT Applications
Frequency 32MHz
Kit Name ARIS EDGE
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
92,84
(excl. BTW)
112,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
€ 92,84
2 - 4
€ 91,85
5 +
€ 91,50
Related Products
XBee S2C 802.15.4 RF modules are built with ...
Description:
XBee S2C 802.15.4 RF modules are built with the Silicon Labs EM357 SoC by Digi International. The design has improved power consumption, support for over-the-air firmware updates and provides an upgrade path to DigiMesh or ZigBee mesh protocols. Also provides ...
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...
Seeed’s LTE CAT.1 Pi HAT is an open ...
Description:
Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.LTE CAT.1 Pi HAT is designed for LTE Category 1 ...
Low power consumptionWide area coverageAT command to controlAuto ...
Description:
Low power consumptionWide area coverageAT command to controlAuto support 3.3v or 5v Arduino boardCompatible with Arduino Leonardo, Uno, Mega2560, DUE… etApplications:Smart metering (electricity, gas and water)Facility management servicesIntruder and fire alarms for homes & commercial propertiesConnected personal ...