Digilent Pmod BLE Bluetooth Low Energy 2.4 → 2.48GHz Bluetooth for RN4870

  • RS-stocknr. 175-2110
  • Fabrikantnummer 410-359
  • Fabrikant Digilent
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Digilent Bluetooth Low Energy Interface

The Digilent Pmod Bluetooth low energy interface is a powerful peripheral module meant for use with any UART enabled development board. This employs the roving networks RN4870 to create a fully integrated Bluetooth low energy interface. This chip features an on-board Bluetooth stack that makes connecting and communicating with any Bluetooth 4.X. It also allows up to five custom public services and up to four custom private services, each allowing up to eight custom characteristics.

Features and Benefits:

• 128-bit AES encryption
• 12-pin Pmod port with UART interface
• Add wireless capability with low power Bluetooth radio
• ASCII command interface over UART
• Bluetooth smart 4.2 BLE compatible
• Customizable GAP, GATT, SM, L2CAP and integrated public profiles
• Secure communications
• UART transparent service for serial data streaming

Applications:

• Beacon applications
• Internet of things (IoT)
• Remote control

Certifications:

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Classification Bluetooth Board
RF Technology Bluetooth
For Use With Health/Medical Devices, Secure Communications, UART Enabled Development Board, Wearable Smart Devices & Accessories
Featured Device RN4870
Kit Name Pmod BLE Bluetooth Low Energy
Frequency 2.4 → 2.48GHz
24 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
26,60
(excl. BTW)
32,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 26,60
Related Products
This USB stick and aerial brings radio to ...
Description:
This USB stick and aerial brings radio to your computer. Listen in to radio signals across a wide frequency range from 24 MHz to 1850 MHz. This covers FM radio, AM signals (although not AM radio) CW (Morse Code) and ...
The RSP2pro is a powerful, wideband SDR receiver. ...
Description:
The RSP2pro is a powerful, wideband SDR receiver. It is a fully assembled SDR module, covering all frequencies from 1 kHz to 2 GHz, with a huge 10 MHz of spectrum bandwidth visibility and capture capability. Housed in a heavy ...
The Pycom Gpy is a MicroPython enabled micro ...
Description:
The Pycom Gpy is a MicroPython enabled micro controller combined with WiFi, BLE and cellular LTE CAT M1/NB1. The GPy gives you full flexibility during testing, installation, deployment and is delivered RCM, IC, CE and FCC certified.Pycom modules are powered ...
The SDRplay RSPduo is a dual-tuner wideband full ...
Description:
The SDRplay RSPduo is a dual-tuner wideband full featured 14-bit SDR which covers the entire RF spectrum from 1kHz to 2GHz giving 10MHz of spectrum visibility. Combined with the power of readily available SDR receiver software you can simultaneously monitor ...