Parallax Inc Bluetooth Module for RN-42

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

RN-42 Class 2 Bluetooth Module

The RN-42 Bluetooth Module provides a reliable low-cost method for creating a wireless serial communication interface between two devices such as a microcontroller, PC, cell phone or another module. This module can pair up with devices supporting Bluetooth SPP (Serial Port Profile) to establish a serial interface. The RN-42 Bluetooth Module is breadboard friendly and is compatible with all 5V and 3.3V microcontroller platforms.

Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module provides compatibility with many devices
Low power consumption for long-lasting battery powered projects
Auto-connect/discovery/pairing modes make connecting to other modules easy
LED indicators provide visual status of connection/mode
Voltage jumper selects for use with 5V and 3.3V microcontrollers
2 x 7 dual row male header with 0.1in spacing
Jumper selectable default baud rates: 9600 or 115200bps
Command-configurable baud rate from 1200 to 92100bps
Range: 35 to 50feet line of sight indoors
Power requirement: 5 or 3.3Vdc
Current consumption: 5mA sleep; 15mA idle; 20mA transmit; 50mA max
Communication: 5V/3.3V UART serial interface with RTS/CTS flow control from 1200–92100bps
Dimensions: 59.18 x 29.46 x 11.43mm
Operating temperature range: -40 to +85°C

Specificaties
Kenmerk Waarde
RF Technology Bluetooth
Kit Classification Module
Featured Device RN-42
9 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
57,39
(excl. BTW)
69,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 57,39
5 - 9
€ 56,25
10 +
€ 55,14
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The Trenz Electronic TE0711-01-100-2C is a FPGA module ...
Description:
The Trenz Electronic TE0711-01-100-2C is a FPGA module integrating a Xilinx Artix-7 100T FPGA, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is ...
The Silicon Labs EFR32 Mighty Gecko SLWRB4150B Radio ...
Description:
The Silicon Labs EFR32 Mighty Gecko SLWRB4150B Radio Board supports dual-band operation thanks to the integrated sub-1GHz and 2.4GHz ISM band transceivers. It is designed to be used with a BRD4001A Mainboard that comes with the SLWSTK6000A Wireless Starter Kit, ...
The BRD4163A Mighty Gecko Dual-Band Radio Board supports ...
Description:
The BRD4163A Mighty Gecko Dual-Band Radio Board supports the development of Zigbee, Thread, Bluetooth Low-Energy and proprietary wireless applications. It is supported by the Simplicity Studio suite of development tools. • EFR32MG12 Cortex-M4F core SoC with 1MB Flash memory, 256KB ...