IES GPS Arduino Shield

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

GPS Plug-in Module (Shield) for Arduino

The IES-SHIELD-GPS and IES-SHIELD-GPAM modules are highly integrated multi-channel simultaneous GPS and GLONASS positioning systems. Both modules include programmable analogue input/digital GPIO. IES-SHIELD-GPAM additionally features an on-board 3-axis accelerometer. Although both modules have an Arduino-shield format, they can also be used with a Raspberry PI SBC. Both modules feature I2C communication with the host in order to leave the serial UART [Tx/Rx] port free for other functions e.g. wireless communication.
GPS data is stored within internal registers which are updated once per second and includes:
Latitude (i.e. vertical)
Longitude (i.e. horizontal)
Altitude (metres)
Time & date (UTC)
Heading (True)
Speed (kilometres per hour)
Satellites in view
The accelerometer of the IES-SHIELD-GPAM can be used to determine inclination for mobile robot applications.
Give your Arduino or Raspberry Pi robot the ability to know where it is, how fast it’s moving and in what direction.

Arduino Shield standard form factor for simple integration into any Arduino project
Fast position acquisition with battery back-up for fast < 1s hot start and < 30s warm start
Integral low power antenna
400kHz I2C communication interface
Jumper-selectable I2C address
Jumper-selectable I2C pull-ups (Not required for Raspberry Pi)
4 x I/O pins programmable as GPIO or analogue inputs for local sensors
GPS Status LED
3-axis acceleration, pitch and roll measurement (IES-SHIELD-GPAM RS 862-5708 only)
Replaceable CR1220 lithium back-up battery
Power supply: +7V to +16Vdc from Arduino Vin pin
Operating temperature range: 0 to +70°C
Dimensions: 56.25 x 53.5 x 20mm
Applications: Mobile robot navigation, vehicle security systems

Specificaties
Kenmerk Waarde
RF Technology GPS
Kit Classification Arduino Shield
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The ARIS board is a hardware and software ...
Description:
The ARIS board is a hardware and software Renesas Synergy platform, ready-to-use on developing Internet of Things (IoT) applications. The system is built around a Renesas Synergy S7 Series high-performance microcontroller. The accelerometer sensor and the gyroscope supply the position ...
The B-L475E-IOT01A Discovery kit allows users to develop ...
Description:
The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by a wide range of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs. • STM32L475VG low-power ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
The STEVAL-IDS001Vx board is an evaluation/demonstration tool for ...
Description:
The STEVAL-IDS001Vx board is an evaluation/demonstration tool for the SPIRIT1 low-power sub-1GHz ISM band RF devices. SPIRIT1 is fully compatible with the wireless M-Bus protocol. RF Operating Frequency: 315MHz (STEVAL-IDS001V2), 433MHz (STEVAL-IDS001V3), 868MHz (STEVAL-IDS001V4), 915MHz ...