- RS-stocknr.:
- 230-6179
- Fabrikantnummer:
- 6069-410-000
- Fabrikant:
- Digilent
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 114,27
(excl. BTW)
€ 138,27
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 114,27 |
5 - 9 | € 112,65 |
10 + | € 111,63 |
- RS-stocknr.:
- 230-6179
- Fabrikantnummer:
- 6069-410-000
- Fabrikant:
- Digilent
Datasheets
Wetgeving en compliance
- Land van herkomst:
- HU
Productomschrijving
Digilents MCC 118 voltage measurement HAT (Hardware Attached on Top) board is designed for use with Raspberry Pi based data acquisition systems. This MCC 118 DAQ HAT has a fixed +/-10V input range, an external scan clock and an external digital trigger input also included. Complete with 2 x 20 Header connectors and Screw terminal connections.
The board comprises of eight single ended analog voltage inputs with 12-bit resolution and a sample rate of 100 kS/ or 320 kS/s aggregate for stacked boards where eight boards can deliver up to 64 channels of data. The MCC 118 HAT add-on board sample buffers allow high-speed data acquisition and the 40W GPIO (general purpose input/output) connector conforms to Raspberry Pi HAT specifications. Powered with 3.3 V provided by the Raspberry Pi through the GPIO header connector.
Software for MCC 118 DAQ HAT includes programming API C/C++® and Python™ examples and an open-source library. Comprehensive API and hardware documentation are also provided, supported Operating Systems such as Linux®/Raspbian.
The board comprises of eight single ended analog voltage inputs with 12-bit resolution and a sample rate of 100 kS/ or 320 kS/s aggregate for stacked boards where eight boards can deliver up to 64 channels of data. The MCC 118 HAT add-on board sample buffers allow high-speed data acquisition and the 40W GPIO (general purpose input/output) connector conforms to Raspberry Pi HAT specifications. Powered with 3.3 V provided by the Raspberry Pi through the GPIO header connector.
Software for MCC 118 DAQ HAT includes programming API C/C++® and Python™ examples and an open-source library. Comprehensive API and hardware documentation are also provided, supported Operating Systems such as Linux®/Raspbian.
Note: Raspberry Pi is not included
Specificaties
Kenmerk | Waarde |
---|---|
Product Name | MCC 118 Voltage Measurement DAQ HAT for Raspberry Pi |
Form Factor | HAT |