RS PRO PCB Reed Relay, 12V dc Coil, SPST, 300V dc Max, 0.5A Max, 1000 Ω
- RS-stocknr.:
- 291-9681A
- Fabrikant:
- RS PRO
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
- RS-stocknr.:
- 291-9681A
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Reed Relay | |
| Contact Configuration | SPST | |
| Mount Type | PCB | |
| Coil Power | 145mW | |
| Coil Resistance | 1000Ω | |
| Terminal Type | Solder | |
| Minimum Operating Temperature | -20°C | |
| Operating Time | 0.5ms | |
| Switching Power | 15W | |
| Maximum Operating Temperature | 70°C | |
| Series | DIP12 | |
| Standards/Approvals | No | |
| Height | 7.5mm | |
| Length | 19.3mm | |
| Isolation Coil To Contact | 2.5kV dc | |
| Latching | No | |
| Contact Resistance | 200mΩ | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Reed Relay | ||
Contact Configuration SPST | ||
Mount Type PCB | ||
Coil Power 145mW | ||
Coil Resistance 1000Ω | ||
Terminal Type Solder | ||
Minimum Operating Temperature -20°C | ||
Operating Time 0.5ms | ||
Switching Power 15W | ||
Maximum Operating Temperature 70°C | ||
Series DIP12 | ||
Standards/Approvals No | ||
Height 7.5mm | ||
Length 19.3mm | ||
Isolation Coil To Contact 2.5kV dc | ||
Latching No | ||
Contact Resistance 200mΩ | ||
- Land van herkomst:
- DE
RS PRO SPNO Reed Relay, 0.5 A, 12 V DC
This RS PRO reed relay is used to control the electromagnet in a non-armature reed switch. Thanks to its operating time of 0.5 MS (including bounce time), it's fast-acting and well-suited for a variety of setups. The part has good resistance to wear and tear as the design is simple and there's no mechanical movement inside the relay.
The unit is easy to install, as its industry-standard pin configurations are compatible with most circuits. Once fitted, the switch area's seal is airtight to keep dirt and dust out.
This type of reed relay is commonly used with mains Triac trigger devices. It's an eco-friendly option for busy workplaces as it needs a low level of power to operate.
Features and Benefits
Approvals
UL
Gerelateerde Links
- RS PRO PCB Reed Relay SPST 0.5A Max, 1000 Ω
- Cynergy3 PCB Reed Relay SPST 0.5A Max, 1000 Ω
- Cynergy3 PCB Reed Relay SPST 0.5A Max, 1000 Ω
- Cynergy3 PCB Reed Relay SPST 0.5A Max, 600 Ω
- Celduc PCB Reed Relay SPNC 0.5A Max, 1000 Ω
- Celduc PCB Reed Relay SPNO 0.5A Max, 1000 Ω
- TE Connectivity PCB Reed Relay SPST-NO 0.5A Max, 1.2 kΩ
- RS PRO PCB Reed Relay SPNO 0.5A Max, 200 Ω