SPST Reed Relay, 0.5 A, 5 V dc @ 14 mA

  • RS-stocknr. 888-7969
  • Fabrikantnummer G4ODC5RFM
  • Fabrikant Opto 22
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

G4 Digital Dry Contact Output Modules

A professional series of digital dry contact output modules form Opto 22. The G4ODC5R module is a single-pole, single-throw, normally open mechanical relay (Form A, SPST-NO). The G4ODC5R5 module is a single-pole, single-throw, normally closed mechanical relay (Form B, SPST-NC).

Switching voltage of 100Vdc or 130Vac maximum
Resistance of 200 milli-ohms maximum
Mechanical life of 5 million cycles
CE approved
Operation temperature: -30°C to 70°C
Coil 5Vdc at 14mA
Maximum Current = 10VA / Voltage

Note

The application of the dry contact module must not exceed 10VA under steady state or momentary in-rush conditions.

OPTO 22 AC, DC Input & Output Modules

Specificaties
Kenmerk Waarde
Contact Configuration SPST
Coil Voltage 5V dc
Mounting Type Rack, Snap-In
Maximum Switching Voltage AC 130V ac
Maximum Switching Voltage DC 130V dc
Length 12.2mm
Height 41.1mm
Depth 48.8mm
Dimensions 12.2 x 48.8 x 41.1mm
Operating Time Including Bounce 250ms
Special Features Analog Signal, Communication Line Multiplexing
Life 5000000 (Mechanical) cycles
Contact Resistance 200 mΩ
Minimum Operating Temperature -30°C
Number of Poles 1
Operating Temperature Range -30 → +70°C
Terminal Type Plug In
Maximum Operating Temperature +70°C
Standards Met CE, CSA, FM, UL
Relay Switching Classification General Purpose Relay
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-10-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
26,93
(excl. BTW)
32,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 26,93
Related Products
Cynergy 3 reed relays have high isolation voltages. ...
Description:
Cynergy 3 reed relays have high isolation voltages. These are ideal for applications such as cardiac defibrillators, test equipment and high voltage power supplies. Low contact resistance10kV ot 15kV isolationMinimum insulation resistance 1 x 1014 ΩPCB or flying leads connections. ...
The UL approved reed relays have very high ...
Description:
The UL approved reed relays have very high isolation voltages. UL reed relays are ideal for applications that require high reliability, these include cardiac defibrillators, test equipment and high voltage power supplies. 10kV isolationLow contact resistancePanel mount or PCBHV connections ...
The S2 (UL) reed relay series is designed ...
Description:
The S2 (UL) reed relay series is designed for applications where PCB is not possible. Mounted in a series of positions the S2 (UL) can be orientated to suit. Flexible leadout wires allow bending for equipment assembly. Variable mounting optionsReliable ...
Miniature reed relay in a dual-in-line (DIL) package ...
Description:
Miniature reed relay in a dual-in-line (DIL) package with a choice of normally open, normally open high-voltage, normally closed or changeover contacts capable of switching up to 300Vdc at 10W. Available with 5V, 12V and 24V coils and diode suppression. ...