Miniature Reed Switch,

  • RS-stocknr. 905-8847
  • Fabrikantnummer HE721C0500
  • Fabrikant Hamlin
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

HE700 Miniature Dual Inline Reed Switch, SIL

These miniature reed relays are capable of switching 300 V dc at 10 W. They are manufactured in a SIL package and contact options include normally open, high voltage normally open or change over.

Potential Applications

Security systems
Telecom equipment
Process control systems
Industrial equipment
Instrumentation

Features

Miniature dual in-line package
Optional coil suppression diode to protect coil drive circuits
Normally open and change over contact options
Diode suppression Option
Operating temperature range: -40°C to +85°C

Littelfuse

Specificaties
Kenmerk Waarde
Contact Resistance 200mΩ
Width 7.62mm
Length 20.14mm
Depth 5.82mm
Dimensions 20.14 x 7.62 x 5.82mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
170 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Bag of 5)
2,434
(excl. BTW)
2,945
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
5 - 495
€ 2,434
€ 12,17
500 - 1245
€ 2,372
€ 11,86
1250 +
€ 2,312
€ 11,56
*prijsindicatie
Related Products
High quality sealed miniature microswitch in industry standard ...
Description:
High quality sealed miniature microswitch in industry standard V4 housing. Monoblock construction assures high sealing capability and is ideal for dusty places or where water is sprayedIEC IP50 rated (solder/pcb terminal), IEC IP67 rated (wire lead )RoHS compliantContact rating: 3A@30Vdc/125Vac, ...
Dual in line programme switches. 1 to 16 ...
Description:
Dual in line programme switches. 1 to 16 selectable s.p.s.t.1 to 8 selectable d.p.s.t or s.p.d.t.(PCB linked).Large numerals and EIA colour coded sliders which are recessed to prevent unintentional changes to the settings.Base and tape sealed for flow soldering and ...
Using a third common contact pin halves the ...
Description:
Using a third common contact pin halves the PCB area to maximise code setting on crowded PCB’s. They are also used widely for two state, pull up / pull down resistor setting. Large numerals and EIA colour coded sliders.Base and ...
MINI MCR series limit value switches, with adjustable ...
Description:
MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection. Power supply possible via the foot element (T-connector)Status and error indication via two diagnostic LEDsPDT relay at output3-way isolationLimit value can be freely adjusted via ...