Eaton 1 Lock Shaft, For Use With P1 Disconnect Switch, P3 Disconnect Switch

  • RS-stocknr. 805-5550
  • Fabrikantnummer P1/P3-M400
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

P1 & P3 Series Isolator Accessories

Handles, shafts and accessories for use with the Eaton P1 & P3 switch-disconnector range.

SVB handles provide door interlock when in the ON position.
SVB switch handles can be locked in the ODD position with up to 3 x 8 mm padlocks.
H-P1 & H-P3 terminal shrouds provides cover for connection terminals.

Specificaties
Kenmerk Waarde
Accessory Type Shaft
For Use With P1 Disconnect Switch, P3 Disconnect Switch
Number of Locks 1
IP Rating IP65
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,32
(excl. BTW)
14,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 12,32
5 - 11
€ 11,94
12 +
€ 11,55
Related Products
The EXZ1 range of enclosed switch disconnectors from ...
Description:
The EXZ1 range of enclosed switch disconnectors from Craig & Derricott are supplied in glass reinforced polyester enclosures with sealing conforming to the IP65 standard. These isolators are designed to offer a suitable solution to disconnect applications within extremely harsh, ...
A series of Altech motor disconnect switches, these ...
Description:
A series of Altech motor disconnect switches, these enclosed switches can be used locally at the motor for added convenience. Handles are supplied with every switch. All models are highly reliable and excellent quality. Voltage: 600 V acNumber of Poles: ...
Interlocked in the ON position to prevent panel ...
Description:
Interlocked in the ON position to prevent panel door being opened while switch is onScrew or DIN rail fixingLockable in the OFF position, with up to three padlocksBuilt in N and PE terminalsThree- pole switches accept add-on switched neutral and ...
Eaton's panel mount isolator switch can sometimes be ...
Description:
Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or ...