ABB 2 Pole Type A Residual Current Circuit Breaker, 40A F202, 30mA

  • RS-stocknr. 488-7182
  • Fabrikantnummer 2CSF202101R1400 - F202A-40/0.03
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

RCCB, F200 series

Residual current circuit-breaker

2-pin or 4-pin
Detects AC and pulsing DC fault currents
Surge-proof up to 250 A and therefore resistant to short leakage currents to earth
DIN rail assembly

Signal contact / auxiliary switch

1 changeover contact
A maximum of three S2C-S / H6R can be installed in sequence

Approvals

  DIN VDE 0664 part 11, DIN VDE 0664 part 1 // 10.85, EN 61008-2-1

Specificaties
Kenmerk Waarde
Current Rating 40A
Number of Poles 2
Trip Sensitivity 30mA
Tripping Characteristics Type A
Series F202
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was € 77,50
65,60
(excl. BTW)
79,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 65,60
Related Products
Assembly comprising a two-pole differential switch and a ...
Description:
Assembly comprising a two-pole differential switch and a reset for start-up control and protection.The integrated reset automatically resets the differential switch, but only after checking the insulation of the downstream circuit.This device can be deactivated when people are present in ...
RCCB for alternating and pulsating DC residual currentsOption ...
Description:
RCCB for alternating and pulsating DC residual currentsOption for power connection from above or belowTunnel terminals with wire protection on both sidesCombination terminal at the bottom for simultaneous connection of busbars and conductorsSafe for fingers and overhands according to DIN ...
The RCCBs F200 series assures protection to people ...
Description:
The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.
All-current-sensitive FI circuit breaker for detection of residual ...
Description:
All-current-sensitive FI circuit breaker for detection of residual AC currents, pulsating and smooth residual DC currentsIncreased operating reliability in networks with capacitive impedances based on adapted actuation characteristicSwitch handle and test button may be locked via handle lockTime-delayed disconnect ...