Vishay Fixed Resistor Mounting Bracket for Wire-Wound Resistors

  • RS-stocknr. 788-5167
  • Fabrikantnummer ACCRF2EDN
  • Fabrikant Vishay
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Wirewound - Adjustable - Brackets

These Vishay brand wire wound adjustable brackets are designed to support and fix resistors in place without providing electrical contact and interfering with the device. Made from corrosion resistant metal, they are designed to be fitted to resistors that have fixing insulated connections, so that they can be mounted on uninsulated panels

Specificaties
Kenmerk Waarde
Accessory Type Bracket
For Use With Wire-Wound Resistors
88 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
5,08
(excl. BTW)
6,15
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 18
€ 5,08
€ 10,16
20 - 48
€ 4,825
€ 9,65
50 - 98
€ 2,315
€ 4,63
100 - 298
€ 2,02
€ 4,04
300 +
€ 1,855
€ 3,71
*prijsindicatie
Verpakkingsopties
Related Products
Ohmite Powr-Rib® series Edgewound and Round Wire rugged ...
Description:
Ohmite Powr-Rib® series Edgewound and Round Wire rugged resistors, designed to handle 700 to 1000 Watts of power. Edgewound resistors are designed for very low resistance and high power capacity, and the Round Wire resistors are used when higher resistance ...
Ohmite resistor Thru-Bolts, along with centering washers and ...
Description:
Ohmite resistor Thru-Bolts, along with centering washers and mica insulating washers, permit perpendicular mounting of series 200, 210 and 270 type resistors to panels up to 0.25" thick.
These Vishay brand wire wound adjustable brackets are ...
Description:
These Vishay brand wire wound adjustable brackets are designed to support and fix resistors in place without providing electrical contact and interfering with the device. Made from corrosion resistant metal, they are designed to be fitted to resistors that have ...
Ohmite resistor Thru-Bolts, along with centering washers and ...
Description:
Ohmite resistor Thru-Bolts, along with centering washers and mica insulating washers, permit perpendicular mounting of series 200, 210 and 270 type resistors to panels up to 0.25" thick.