Igus RL-DC-BL-30-BX-01 Robot Base Kit, Size 30, 281 x 151 x 100mm

  • RS-stocknr. 109-6488
  • Fabrikantnummer RL-DC-BL-30-BX-01
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Base Kits

A pressed sheet metal base for Robolink D robotic arm components, the Igus low-cost introduction into robotic technology and collaborative robots.

Designed to provide a base on which to construct your robotic arm, these bases have 4 mounting points for firm mounting to work surfaces and benches and are available in two sizes. The kits come supplied with high-quality HARTING connectors for providing power and communication signals to the robots joints and your chosen method of control.

The Igus robotic kits are provided without a controller giving you the freedom to choose the best method to suit your needs and your requirements (suitable examples include Raspberry Pi, Arduino, PLCs. Giving the user the freedom to pick a language and system they are familiar with).

The size 50 base is pre-drilled to suit the igus size 50 Robolink D drive joint kit for a robot capable of dealing with payloads of up to 4Kg.

The size 30 base is pre-drilled to suit the igus size 30 Robolink D drive joint kit for a robot capable of dealing with payloads of up to 1Kg.

Features and Benefits

Pressed metal construction
Black Finish
Pre-drilled mountings for use with IGUS Robolink D Components
Power and Communication connectors included

Applications

Robolink D is also suitable for a vast array of industrial applications including:
Pick and Place
Lightweight general assembly
Machine component loading
Laboratory automation

The freedom to build to your own requirements and use your own choice of controller and programming language makes them the ideal choice for education.

Igus RobolinkD

Specificaties
Kenmerk Waarde
Size 30
Compatible With Igus Robolink D Components, RL-D-30-102
Electrical Connection D Sub DD-50, Harting Han D (Size 16A)
Dimensions L x W x H 281 x 151 x 100mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Kit
520,50
(excl. BTW)
629,80
(incl. BTW)
Kit(s)
1 +
€ 520,50
Related Products
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 ...
Description:
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 kHz, 800 kHz and 1.2 MHzAdjustable Current Limit Settings with Hiccup Restart0.6 V ±1% Reference Voltage Across Full Temperature RangeOptional External 5-V Bias Support for Enhanced EfficiencyD-CAP3™ Control Mode for Fast Transient ...
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
The STEVAL-IHM043V1 demonstration board is a three-phase permanent ...
Description:
The STEVAL-IHM043V1 demonstration board is a three-phase permanent magnet brushless motor driver designed to drive a motor using a sensorless 6-step commutation technique. The board can operate from a DC input voltage between 7 and 42 VDC and supply a ...
The STEVAL-IPM10F is a compact motor drive power ...
Description:
The STEVAL-IPM10F is a compact motor drive power board based on the SLLIMM™ (small low-loss intelligent molded module) 2nd series module STGIF10CH60TS-L. It provides an affordable and easy-to-use solution for driving high power motors for a wide range of applications ...