ST Robotics Vacuum Suction Cup Robot Gripper

Wetgeving en compliance
Land van herkomst: GB

ST Robotics V17 Vacuum Pickup

The V17 vacuum gripper for the R17 robot arm comprises of suction cups on a mounting plate with the pneumatic fittings behind it.
The vacuum gripper has 3 suction ports which are routed within the robot to the pneumatic circuit which is connected to the controller. There are 4 tapped holes to allow for custom components to be utilised.
The pneumatic circuit includes a feedback sensor which knows when the vacuum pickup has connected to an object.

Features and Benefits

• Air consumption: 46 L/min (ANR)
• Maximum vacuum pressure: -88 kPa (12.76 psi)
• Maximum suction flow rate: 24 L/min (ANR)
• 3 suction cups supplied

Product Application Information

The vacuum pickup gripper is ideal for items that have a flat surface. Although they are less precise than finger grippers, they can lift an item from the top instead of the side.

ST Robotics


  • "Robot Range: Check delivery on order. *Non-returnable. Conditions apply.

    This item is from our Robot Range
    • At RS we like to offer our customers the widest choice of products possible. These products are specially manufactured by the supplier, on our behalf.
    • Check latest delivery when ordering.
    • Please ensure you have selected the correct product as once your order has been placed it cannot be cancelled or returned
    • Not available for premium delivery"
Kenmerk Waarde
Gripper Type Vacuum
End Effector Suction Cup
Number of Fingers 4
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.441,72
Related Products
The E1 gripper for the R12 robot arm ...
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The TC17 tool Changer has been exclusively designed ...
The TC17 tool Changer has been exclusively designed for the ST Robotics R17 robot and requires compressed air to operate. It is supplied with all valves, circuits and software. The TC17 comprises of two parts, the robot side adapter and ...
The PG17 pneumatic gripper designed for the R17 ...
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting ...