Needle roller bearing ID 50mm OD 72mm Wi

  • RS-stocknr. 194-7297
  • Fabrikantnummer NA4910-XL
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The Bearings can support high to very high radial forces Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing) Permit high speeds in spite of line contact Compensate misalignments between the shaft and housing (aligning needle roller bearings) Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring Are available in numerous sizes and designs Result in particularly compact, cost-effective and economical bearing arrangements

Specificaties
Kenmerk Waarde
Inside Diameter 50mm
Outside Diameter 72mm
Roller Bearing Type Needle
Race Width 22mm
Bore Type Parallel
Material Steel
Static Load Rating 80000N
Number of Rows 1
Dynamic Load Rating 53000N
End Type Open
Fatigue Limit Load 14100N
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
58,36
(excl. BTW)
70,62
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 58,36
5 - 9
€ 56,03
10 - 24
€ 54,86
25 +
€ 53,70