JSHD Series Safety Switch, 3 Position, IP65

  • RS-stocknr. 733-2297
  • Fabrikantnummer 2TLA019995R2400
  • Fabrikant ABB Jokab
Wetgeving en compliance

Enabling Switch, JSHD Series

The JSHD series from ABB Jokab offers the ability to operate machinery safely via a three position control device. Many different versions are available for a wide variety of applicational uses. Key features which have been incorporated within this series from ABB Jokab include a front button (for programme start, low speed, etc), a top button (for programme stop, grip devices, etc),a bottom plate (wide bottom plate for fixing interlocking devices and Eden (non-contact sensor) or narrow bottom plate for more flexible handling), a cable version (straight or spiral cable with connectors or assembled on the device), LED indication and finally the device is designed to work with a safety relay or PLC.

Multiple uses in troubleshooting, test running and programming where no other protection is available or feasible
Key adavntages of the JSHD4 enabling device include it being ergonomic, adaptable and the device provides LED status information
Mechanical life of 1000000 cycles to the middle position
The body material consists of Polyamide 6.6
Operating force of approximately 15 N
High protection class rating of IP65
Insulation resistance of a minimum of 20 MΩ



Enabling Switch

Kenmerk Waarde
Series JSHD
Number of Positions 3
Supply Voltage 50 V
Supply Current 200 mA
IP Rating IP65
Connection Type Cable
Reset Method Push to Release
Housing Material Nylon 6.6
Dimensions 173 x 63 x 74.5 mm
Depth 74.5mm
Length 173mm
Width 63mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 458,26
Related Products
The 87 series modular keyboards have a low ...
The 87 series modular keyboards have a low profile and plug into any printed circuit board from a 1/32nd to 1/8th thickness. Users can build a custom keyboard with identical button spacing’s no matter how they are stacked, always maintaining ...
The MZM100 Safety switch from Schmersal has a ...
The MZM100 Safety switch from Schmersal has a solenoid interlock without a positive-linked mechanical locking mechanism. It uses an electromagnet to generate a 500-N holding force and then transmits the signal “interlock locked” to the safety-monitoring module. The forced-closed operating ...
The IN4000 inductive safety switch is used for ...
The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this ...
XPS-VC switches XY2AU used in conjunction with the ...
XPS-VC switches XY2AU used in conjunction with the XPS-VC safety relay offer a certified safety solution ensuring the safety of machine operators during setting and maintenance operationsUse while carrying out adjustment of moving partsAllows operators to enable start and stop ...